Page 3: embroidered hooded fleece pocket

• 6.8 oz./yd_, 100% cotton (Green Camo)
• 70/30 cotton/polyester (Black Camo)
• Black drawcord
• Front pouch pocket
• Rib bottom and cuffs

• Flame-resistant, 10.5 oz./yd_ (355 g/m_), 67% Modacrylic/ 29% Cotton/ 4% Polyester
• 360 visibility with front and back 2" flame resistant heat seal silver reflective striping
• Hood with drawcord closure
• Rib knit cuff and waistband
• Large hand warmer pocket, concealed utility pocket inside front pocket
• IQ reinforcement at interior of sleeves

Tall sizes available under style SMH4T

• 8 oz./yd_, polyester softshell bonded to micro fleece
• Water-and wind-resistant
• 2" reflective tape
• Breathable
• Zippered front pockets

ANSI/ISEA 107-2015 Type R Class 3 Certified

• 4.6 oz./yd_ (US), 7.7 oz./L yd (CA), 155 gsm, 100% polyester pongee
• Shell lining is 100% taffeta with embossed print
• Fully seam-sealed waterproof shell
• Brushed tricot chin guard and pockets
• Storm flap with metal snap closure
• Thermal brushed tricot-lined collar
• Thermal retention shock cord at hood and hem

• Linner jacket is 7.5 oz./yd_., 255 gsm, 96/4 polyester/spandex bonded with 100% polyester fleece
• Linner jacket lining is 100% polyester tricot in sleeves
• Bonded two-layer soft shell liner with water repellent finish
• Brushed tricot-lined pockets
• Zip-off hood with back adjustable tab

• UTK 2 temperature range: 34F to -3F / 1C to -19C

• 4.7 oz./yd_, 60/40 cotton/ polyester sanded duck
• Micro-duck fabric is tough and durable
• Quilt lining and longer length
• Water-and-water resistant
• Three-piece sherpa-lined hood
• Outside storm flap and hidden rib knit cuffs trap the heat
• Fleece-lined side entry pockets and two front pockets with snap closure

• 13 oz./yd_, 56/34/10 modacrylic/lyocell/aramid
• 2-piece hood with drawcord
• Split-pouch pockets
• Ribbed cuffs to keep air out, and sleeves in place during movement

Certifications Level 1: NFPA 2112, NFPA 70E, ASTM F1506

Certifications Level 2: Category 2 Protection

Hazard: Flash Fire, Arc Flash

EBT Arc Rating: 9.9

Regular sizes available under style SMZ8

• 8.5 oz./yd_, (280gm) 60/35/5 cotton/polyester/spandex
• Standard fit
• 4-way stretch French terry
• 100% ring-spun cotton face yarns for printability
• Pre-laundered fabric to reduce shrinking
• Sewn eyelets
• Flat drawcord with capped tip
• Double layer 3-panel hood
• 320gm 1x1 ribbing at cuff and waistband
• Hidden welt pockets
• Tear away label

• 8.2 oz./yd_, 55/45 cotton/polyester fleece
• Unlined hood with matching drawcord
• Pouch Pocket
• 1x1 rib knit cuffs & waistband
• Classic Fit

• 7.5 oz./yd_, 80/20 cotton/polyester
• Full-cut 2-ply hood with matching drawcord
• Double-needle stitched seams
• Front pouch pocket
• Tear away label

• 100% poly twill; 3.9 oz./yd_/132 gsm (US), 6.5 oz./L yd (CA),
• Polyester taffeta lining
• 7.7 oz Polyester lining jacket with anti-pill fleece
• Water resistant and cire finish
•  Roll-away hood
• Thermal retention shockcord at hood and drop back hem
• Adjustable cuffs with tabs
• Storm flap with hidden snaps at top and bottom
• Placket at liner
• Center front reversible zipper
• Lower concealed pocket with zippers and reflective toggles
• Lower concealed pockets with auto-lock zippers
• Reflective piping at shoulder yoke and upper back panels
• Audio port access through inside left pocket

• 6 oz./yd_, 100% polyester
• Contrast raglan sleeves
• Front pouch pockets
• Overlock stitching detail
• Hemmed bottom & cuffs
• Nylon zipper
• Black drawcord

• 7.8 oz./yd_, 50/50 US grown cotton/polyester
• The polyester content is currently transitioning to CiCLO polyester
• Patented, low-pill, high-stitch density PrintPro XP fleece
• Double-ply hood, no drawcord for safety
• Pouch pocket
• Ribbed cuffs and waistband
• CPSIA tracking label compliant
• Transitioning to tear away label

This product meets the following Sustainable Style subcategories:

Sustainable Manufacturing: This product was made in a facility that is run by at least 50% renewable energy

Socially Conscious Manufacturing: This product was made in a facility that utilizes the Higg Index and has implemented Level 2 practices or above, and was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 3.39 oz./yd_/115 gsm (US), 5.7 oz./L yd (CA), 100% polyester taslan
• Water-resistant finish
  
• Polyester fleece lining in body polyester taffeta lining in sleeve and hood
• Thermal polyfill insulation in sleeves
• Rollaway hood
• Thermal retention shockcord at hood and hem
• Storm flap with hidden snaps with partial inside placket and chin guard
• Reflective piping at front and back yoke
• Elasticized cuffs
• Center front coil zipper with autolock slider and reflective rubble toggle
• Lower concealed pockets with zippers
• Audio Port

• 10.5 oz./yd_ (US), 17.5 oz./L y (CA), 75/25 cotton/recycled polyester, 18 singles
• Hammer Maxweight 2-end heavyweight fleece is a combination of style and functionality - made with recycled polyester and 100% cotton face ideal for decorating
• Classic fit
• 2-end heavyweight fleece with 100% cotton face
• 2 ply self-fabric hood with wide color matched flat cord
• Pouch pocket
• 1x1 rib at cuffs and waistband
• Tear away label

• Proud member of the U.S. Cotton Trust Protocol
• Made with OEKO-TEX certified low-impact dyes

• 8 oz./yd_, 50/50 cotton/polyester
• Double-lined hood
• Pouch pocket
• Double-needle stitching at waistband and cuffs
• Tear away label

• 9 oz./yd_ (US), 15 oz./L yd (CA), 3-Layer, 96/4 polyester/ spandex
• Bonded to 100% polyester fleece with inner membrane
• Poly fill in body: 2.9 oz/yd_, polyester taffeta lining
• Poly fill in hood and sleeves:4 oz/yd_, polyester taffeta lining
• 8,000 mm waterproof rating
• 800 g breathability rating
• EZAWAY SYSTEM featuring zip-off thermal hood; inside storm placket with fleece chin guard
• Right-chest zippered pocket
• Adjustable fleece-lined cuffs
• Shock-cord at hood and drop back hem
• EZEM SYSTEM embroidery access

• 10 oz./yd_, 80/20 cotton/polyester fleece
• Double-needle stitched throughout
• Jersey lined hood with contrast trim around opening
• Split front placket with six metal eyelets and white drawcord
• Twill tape at back of neck
• Side seams
• Set-in pouch pocket
• 2x2 ribbed cuffs and waistband
• Contrast-color self-fabric sleeve panels
• Tear away label
• Interchangeable custom-color laces can be ordered separately (style 8831)

• 8.5 oz./yd_, 80/20 cotton/polyester
• Classic fit
• Double-needle stitched throughout
• Double-lined hood
• Pouch pocket
• 1x1 ribbed cuffs and waistband with spandex
• Sewn in label