Page 26: Custom embroidered green

• 4-ounce 100% polyester double mesh with PosiCharge technology
• Partially made from recycled coffee grounds
• Contrast neck taping
• Tag-free label
• Flat knit collar
• 3-button placket with dyed-to-match buttons
• Triple-needle yoke and armholes
• Set-in open hem sleeves

• 3.5 oz./yd (US), 5.8 oz./L yd (CA), 100% polyester interlock
• Team fit
• Cationic dyes for superior brightness and color fastness
• Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
• UPF 40+
• Transitioning from heat-seal label to tear away label

• 3.8-ounce 100% polyester
• Color-locking PosiCharge technology (solid body only)
• UPF rating of 30
• Tear-away removable label

• 3.8-ounce 100% poly interlock with PosiCharge technology
• UPF rating of 30+
• Tear-away label

• 100% polyester knit shell with DWR finish bonded to water-resistant film insert and a 100% polyester brushed grid-texture microfleece lining
• Can be zipped in and secured by snap attachments inside an outer Collective layer
• 5000MM fabric waterproof rating
• 5000G/M2 fabric breathability rating
• Molded center front zipper
• Matte waterproof hand pocket zippers
• Gunmetal reflective taping details at shoulder pocket and back

• 83/17 polyester/spandex moisture-management fabric
• Stretch body fit
• Self-fabric collar
• Double-needle hem
• Badger heat seal logo on left sleeve
• Heat sealed label

• 90/10 cotton/polyester (Athletic Heather)
• Made with sustainably sourced USA-grown cotton
• Welt knit collar that resists curling
• 1x1 rib knit cuffs
• 3-button placket with bottom box stitch
• Pearlized buttons with durable cross-stitching
• Double-needle hem

• Elongated front zippered pockets double as air vents for enhanced breathability when open
• 10 000MM fabric water protection rating 10 000G/M2 fabric breathability rating interior storm flap chin guard reverse coil locking zippers binding at cuffs open hem with locking drawcord
• Princess seams reflective Eddie Bauer logo on right hem
• Made of 100% polyester knit shell with a durable water-repellent (DWR) finish and bonded to a laminated film insert

• 9 oz./yd (US) 15 oz./L yd (CA), 80/20 ring-spun cotton/polyester blend with 100% cotton face, 30 singles
• Classic fit
• Split stitch double needle sewing on all seams
• Twill neck tape
• 1x1 ribbing at neck, cuffs and waistband
• Woven label

• 4.2-ounce 50% recycled polyester 25% organic ring spun cotton 25% modal
• 25% recycled polyester 25% polyester 25% organic ring spun cotton 25% modal (Aluminum Grey)
• This product's carbon footprint has been measured and reduced through a combination of preferred materials and investing in carbon offset projects through the ClimeCo Certified Product Program
• 1x1 rib knit binding at neck and armholes
• Side seams

• 5 oz./yd, 100% polyester fabric
• Contrasting inside collar, shoulder and sleeve inserts
• Badger sport shoulder for maximum movement
• Self-fabric collar with full length locking zipper
• Two front zipper pocket with headset opening
• Soft elastic binding sleeve and bottom hem
• Drop tail hem
• Badger "B" woven loop label on bottom hem

• 13.5 oz./yd (US) 22.5 oz./L yd (CA), 70/30 ring-spun cotton/polyester fleece with 100% cotton face yarns on solid colors, 20 singles
• Double fleece lined hood
• Antique silver eyelets
• Heavy duty 100% cotton shoestring drawcord with antique silver tips
• Double ribbing side panels for stretch
• Reverse coverstitch sewing on all seams for durability and a premium finish
• Body and hood panels sewn cross-grain to limit shrinkage & shortening after wash
• 520gm 100% cotton 1x1 ribbing at cuffs and waistband
• Tear away woven label

• 7.6 oz./yd, 55/41/4 polyester/cotton/rayon
• Antique brass zipper
• Side seam pockets
• Set-in sleeves
• Spandex blend ribbed-knit inner collar, cuffs and waistband
• Faux leather loop logo on right bottom hem
• Woven label

• 3.8 oz./yd (US), 6.3 oz./L yd (CA), 100% recycled polyester
• Hydrophilic finish
• Self-fabric collar
• Three-button placket
• Contrast heat-transfer logo on right hip
• The preferred decoration method is heat transfer due to lightweight fabric
  • Embroidery decoration should be performed with the proper equipment on lightweight performance fabrications.  Proper stabilizing techniques and the correct hoops, backing, needles, and sewing threads are crucial to prevent damaging the garment.

Responsible Materials: contains 100% recycled polyester

Responsible Manufacturing: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified, and the company that makes this product is Fair Labor Accredited.

• 60/40 cotton/polyester front with 100% polyester mesh back (Solid)
• 97/3 cotton/spandex front with 100% polyester mesh back (Camo/Flag Mesh)
• Structured
• Mid Pro shape
• Precurved bill
• Adjustable snapback closure

• Moisture-wicking with odor control
• Tear-away label
• 1x1 rib collar with clean neckline
• Double-needle coverstitching on front neck
• Shoulder-to-shoulder taping
• 1x1 rib cuffs
• Double-needle hem

• 100% sublimated polyester moisture-management/antimicrobial performance fabric
• Badger sport shoulder for maximum movement
• Self-fabric collar
• Double-needle hem
• Badger heat-seal on left sleeve

• 5-ounce 65/35 polyester/cotton pique
• Moisture-wicking
• UPF rating of 20-40+
• Wrinkle-resistant
• Shrink-resistant
• Fade-resistant (Except for Neons)
• Easy Care
• Anti-curl flat knit collar
• 3-button placket
• Dyed-to-match pearlized buttons
• Flat knit cuffs
• Side vents
• Drop tail hem

• 5-ounce 65/35 poly/cotton pique
• Flat knit collar and cuffs
• Metal buttons with dyed-to-match plastic rims
• Double-needle armhole seams and hem

• 5.5-ounce 50/50 cotton/poly
• Left chest pocket
• Tear-away label
• Please note: This product is transitioning from white to black tear-away labels. Your order may contain a combination of both colored labels.