Page 3: embroidered safety high visibility

• 4.6-ounce 100% poly microfleece upper body lining
• 3-ounce quilted polyfill lower body lining
• 2-ounce quilted polyfill hood and sleeve lining
• Black bottom front and lower sleeves for a cleaner appearance
• Fabric waterproof rating: 5000MM
• Fully seam-sealed
• Adjustable rain hood
• Durable reflective 2-inch tape meets ANSI 107 requirements
• Full-length exterior storm flap
• Left chest pocket
• Right chest pocket
• Two lower front pockets
• Center front zippered pocket to hold a tablet
• Mic clips at shoulders
• Elastic cuffs
• Elastic hem
• Decoration access pocket

• 100% polyester
• 4 layer filtration system provides basic protection against non-toxic dust, smoke and other non-toxic particles found on the job site
• Concealed reflective piping along hood, front and back chest seams for better low light visibility
• Thumbhole on cuffs
  
• Durable lightweight lime water-resistant ripstop shell with lining
• Adjustable hood
• 2 wide high-performance reflective tape
• Durable black water-resistant ripstop in high-wear areas, along the sides and under the arms
• Tall collar design with asymmetrical zipper to avoid chaffing
• Left chest pocket with a zipper closure
• Lower slash pockets with a zipper closure

• Polyester/spandex
• Moisture-management and anti-odor finishing
• Black mesh paneling
• 2" wide high-performance stretch reflective tape
• Left chest pocket

Cooling fabric tested by Q-Max and has a 14% higher cooling rate than our current fabric.

ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Shell: Flame-resistant, 7 oz./yd (235 g/m),  48% Modacrylic/ 37% Lyocell/ 15% Aramid, Water-repellent
• Lining: 100% Cotton
• Insulation Package: 12 oz./yd (405 g/m), 100% Modacrylic
• 360 visibility with front and back 2" silver reflective striping
• DWR Durable Water Repellent finish
• Separating, Nomex taped zipper
• Rib knit collar
• Two large inset slash welted pockets, Napoleon chest pocket with zipper closure
• One inside chest pocket
• Lanyard access back
• Mic loop for gas monitor
• Home Wash

• Polyester
• Durable waterproof seam sealed shell with thermal insulation
• 2 wide reflective material with 3 contrasting panels
• Detachable hood
• Black bottom front & sleeves
• Lower slash pockets angled
• Left chest radio pocket with flap and D-ring

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Polyester/spandex
• Moisture-management and anti-odor finishing
• Black mesh paneling
• 2" wide high-performance stretch reflective tape
• Left chest pocket

Cooling fabric tested by Q-Max and has a 14% higher cooling rate than our current fabric.

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 6.95 oz./yd, 50/40/10 modacrylic/lyocel/twaron, modacrylic flame-resistant blend interlock knit material
• Lightweight
• 2 wide high performance breathable reflective material greatly reduces hot spots and provides greater flexibility over solid tapes
• Dark flame-resistant sides provide visual contrast
• Left chest pocket

• 100% polyester lining
• Black bottom front and lower sleeves for a cleaner appearance
• Shell's fabric waterproof rating: 5000MM
• Fully seam-sealed shell
• Adjustable rain hood
• Durable reflective 2-inch tape meets ANSI 107 requirements
• Full-length interior and exterior storm flaps
• Vented cape back
• Right chest pocket and retractable ID holder
• Two lower front pockets
• Center front zippered pocket to hold a tablet
• Gusseted cuffs
• Elastic hem
• Decoration access pocket in shell
• Non-ANSI 8.6-ounce 100% polyester inner full-zip hoodie
• Hoodie can be attached inside shell

• 12.3 oz./yd, 48/37/10/5 modacrylic/lyocell/para-aramid/spandex, modacrylic flame-resistant blend
• Sweatshirt material with extremely soft fleece-like inner texture
• Black bottom enhances worker's appearance
• Nomex FR zipper front closure
• 2" wide breathable reflective material provides flexibility and comfort
• Two outside lower slash pockets

• Modacrylic blend Flame Resistant solid material
• FR hook-and-loop front closure
• 2 wide laminated reflective material
• Two lower inside patch pockets
• One inside left chest 2-tier, 4-division pencil pocket
• Made in USA

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Polyester/spandex
• Mesh back
• Black bottom on front (Contrast on shirt, a request from Dept. of Transportation)
• Left chest pocket
• Breathable tape stretches

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Polyester/spandex
• Mesh back
• Black bottom on front (Contrast on shirt, a request from Dept. of Transportation)
• Left chest pocket
• Breathable tape stretches

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Polyester/spandex
• Moisture-management and anti-odor finishing
• Black mesh paneling
• 2" wide high-performance stretch reflective tape
• Left chest pocket

Cooling fabric tested by Q-Max and has a 14% higher cooling rate than our current fabric.

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 2

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 6.2 oz., modacrylic flame-resistant mesh material
• 2" wide breathable reflective material
• FR hook-and-loop front closure
• Two lower inside patch pockets
• Left chest inside two-tier, four-division pocket

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 2 wide ORALITE prismatic tape performs exceptionally well under wet conditions and provides additional durability compared to silver glass beaded reflective material
• Reflective piping accents add better visibility in low light
• Durable ripstop material with waterproof seam sealed construction
• Tall collar designed with asymmetrical zipper to avoid chafing
• 6 side zipper for added comfort when sitting and provides improved airflow
• Thermal insulation
• Adjustable cuffs
• Black lower body and sleeves help the wearer keep a clean appearance
• Storm cuff (powder barrier) waist liner keeps wind and snow out of critical areas
• Two outside lower inset pockets with zippers
• Hidden left chest pocket
• Left forearm zipper pocket with microfiber wipe for cleaning safety glasses
• Inside lower left hidden tablet (iPad) pocket with zipper

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

"CLICK HERE to watch product video"

• Flame-resistant, 6.7 oz./yd (225 g/m), 48% Modacrylic / 37% Lyocell / 15% Aramid
• 360 visibility with front and back 2" segmented heat seal silver reflective striping
• Concealed chest pocket with pencil stall
• Full underarm gussets Rib knit cuffs
• Industrial Laundry - Light Soil, Home Wash

Regular sizes available under style SMK8

• 4 oz./yd, 100% polyester birdseye mesh
• Moisture-management
• Relaxed fit
• 2" reflective stretch tape
• Left-chest pocket
• Taped neck seam for comfort
• ANSI/SEA 107-2020 Type R Class 3 Certified
  

• 100% polyester
• Lower 3-way pockets
• Chest pockets
• Water resistant retractable clear ID
• Side water bottle pockets with adjustable bungee cord
• Black reflective binding
• Padded collar
• Back pouch pocket with left and right zipper access
• American flag patch that is attached with hook-and-loop (2"H x 4"W)
• Orange Contrast panels
• Magnet closures used throughout all over the vest

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 2

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.