Page 2: embroidered yellow high visibility

• ANSI/ISEA 107 Class 2 certified
• 100% polyester oxford for smooth printing
• Dyed-to-match binding and Vislon zipper
• Mesh inset at back for breathability
• 2-in. wide reflective taping on front and back
• Chest and lower pockets for pen and tools

• ANSI/ISEA 107 Class 3 certified
• Water resistant 100% PU shell 100% polyester backing
• 8000MM fabric waterproof rating
• Snap-off hood with drawcord and toggle for adjustability
• Two-way black Vislon zipper
• Internal storm flap
• Half-elastic adjustable tab cuffs with hook and loop closures
• 2-in. wide reflective taping on front back and sleeves
• Two welt pockets
• Drawcord hem with toggle adjustability
• This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

• ANSI/ISEA 107 Class 2 certified
• 5.9-ounce 100% polyester interlock
• Wicks moisture
• UPF rating of 50+
• 2-in. wide reflective taping on front and back

• Ultra-Cool 100% polyester mesh with solid pockets
• Zipper front closure reinforced with durable webbing
• 2" wide reflective material
• Left and right chest mic tabs
• Left and right lapel grommets
• Left chest radio pocket and clear ID holder with flap
• Right chest 2-tier 4-division pencil pocket
• Outside left and right full width pockets
• Inside right chest pocket with flap
• Inside lower left full width pocket with load-bearing strap
• Inside lower right full width pocket with hook & loop closure
• Hidden back pouch with left and right snap access

• 4 oz./yd, 100% polyester birdseye mesh
• Relaxed fit
• Moisture-management properties
• 2" reflective segmented tape
• Taped neck seam for extra comfort
• Left-chest pocket

ANSI Class 2 Certified

Tall sizes available under style HVK017T

• 9 oz./yd, polyester sweatshirt material
• Black lower body and sleeves help keep a clean appearance
• Black ribbed-knit cuffs
• 2 wide high-performance reflective material
• Lower outside slash pockets

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• ANSI/ISEA 107 Class 3 certified
• 100% polyester shell 100% polyester quilted lining
• 6-ounce polyfill-lined body 4-ounce polyfill-lined sleeves
• 8000MM fabric waterproof rating
• Fully seam-sealed for additional waterproof protection
• Snap-off adjustable hood
• Drawcord waist with toggles
• Storm flap
• 2-in. wide reflective taping on front back and sleeves
• Two-way zipper
• Waterproof zippered pockets
• Hand warmer pocket
• Bellow pockets
• Molded adjustable tab cuffs with hook and loop closures
• Interior MP3 player pocket
• Port Pocket for easy embroidery access

• 4.1-ounce 100% polyester birdseye mesh
• UPF rating of 30
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body
• 1x1 rib knit neck
• Back neck tape

• Polyester
• Durable ripstop material
• Quilted liner with thermal insulation
• 2 wide high-performance reflective material
• Black bottom
• Left chest pocket with retractable clear ID and flap
• Right chest pocket with flap
• Lower front 2-way pockets with flaps and side openings
• Lower left tablet pocket with zipper
• Inner right and left chest pockets with zipper closures

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 2

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 9 oz./yd, 100% polyester fleece
• 5 oz./yd, 100% polyester mesh lining
• Double-lined three-piece hood
• Nylon front zipper
• 2" reflective tape
• Oversized front pockets
• Knit cuffs and waistband

• UPF rating of 30
• Hat- and helmet-compatible 3-panel hood
• Segmented durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and easy movement

• 100% polyester woven shell with durable water-repellent (DWR) finish bonded to a water-resistant breathable film insert and a 100% polyester microfleece lining
• Black bottom front and lower sleeves for a cleaner appearance
• Fabric waterproof rating: 5000MM
• Fabric breathability rating: 5000G/M2
• Full-length interior storm flap with chin guard
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves; tape is bonded to fabric
• Molded right chest hand and center front zippers with rubber pulls
• Mic clips at shoulders
• Elastic cuffs with adjustable hook and loop closures and rubber tabs
• Adjustable drawcord hem

• Flame-resistant, 6.7 oz./yd (225 g/m), 48% Modacrylic / 37% Lyocell / 15% Aramid
• 360 visibility with front and back 2" segmented heat seal silver reflective striping
• Concealed chest pocket with pencil stall
• Full underarm gussets Rib knit cuffs
• Industrial Laundry - Light Soil, Home Wash

Tall sizes available under style SMK8T

• 8 oz./yd, polyester softshell bonded to micro fleece
• Water-and wind-resistant
• 2" reflective tape
• Breathable
• Zippered front pockets
• ANSI/SEA 107-2015 Type R Class 3 Certified
  

• 3 oz./yd, PVC/Modacrylic Knit, Water-Repellent
• Non-conductive durable hardware
• 1 1/2" reflective striping
• Two patch pockets with flaps
• Vented back with "D" ring access
• Take-up tabs on cuff
• Hand or machine wash gentle cycle. Use mild soap. Line Dry

• Solid polyester front with mesh back
• Heavy duty black bottom to help keep a clean appearance
• Zipper front closure reinforced with durable webbing
• 2 wide high-performance reflective material with 2.5 contrasting black panels
• Reinforced left and right mic tabs
• Padded neck for extra comfort
• 2 lapel grommets
• 7 anchor points certified to tether 25lbs each with a maximum tether length of 54
• D-ring access and side slits for ease of movement.
• Black reflective trim
• Large left chest gusseted pocket with dual-function flap that can be held open by hook & loop
• Retractable clear ID holder and an anchor point.
• Right chest 2-division pocket with D-rings
• Lower full length multi-function pockets that can be held open by hook-and-loop including reinforced anchor points for tool tethers
• Hidden back pouch pocket with left and right zipper access
• Internal double layer pockets with load bearing straps

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 2

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 4.1 oz./yd, 100% polyester birdseye
• Microfiber moisture-management fabric 
• 2 wide high-performance reflective material
• Black bottom front to keep t-shirt appearance clean and professional
• Lower inside microfiber patch for cleaning safety glasses
• Left chest pocket

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 2

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Ultra-Cool 100% polyester mesh material
• Brilliant Trim reflective edging improves low light visibility
• Hook-and-loop front closure reinforced with durable webbing
• 5-point breakaway on shoulders, sides, and front closure
• 2" wide high performance reflective material on 3" contrasting color
• Left and right chest mic tabs
• Two lapel grommets
• Outside right chest 2-tier, 4-division pocket
• Outside left chest multi-use cell pocket
• Inside lower patch pockets
• Two lower outside cargo pockets with adjustable flaps and grommets

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 9 oz./yd, 100% polyester fleece
• Medium-weight fleece lined
• 2" reflective tape
• Double-layered three-piece hood
• Nylon front zipper
• Oversized split-pouch pockets
• Knit cuffs and waistband

ANSI Class 3 certified

Tall sizes available under style HVF023T

• 6.95 oz./yd, 50/40/10 modacrylic/lyocel/twaron, modacrylic flame-resistant blend interlock knit material
• Lightweight
• 2 wide high performance breathable reflective material greatly reduces hot spots and provides greater flexibility over solid tapes
• Dark flame-resistant sides provide visual contrast
• Left chest pocket