full zip hooded water resistant gray

• 5.2 oz./yd_, 97/3 recycled polymide/elastane
• Durable water resistant - PFC free
• Full-zip closure
• Large front pockets
• Embroidered logo on left chest

• 3.5 oz./yd_, 100% nylon shell
• Mesh-lined body and hood
• Waterproof, seam sealed, 10,000mm
• Breathable, 5,000gm
• Windproof
• Inside media pocket
• Adjustable hem, hood and cuffs
• Waterproof zippers
• Embroidery access for ease of decoration

• 2.36 oz./yd_, 100% polyester
• StormShield water-resistant, DWR finish
• Easy to pack jacket into built-in packable pocket pouch
• Packable hood with hidden drawcords
• Zippered hand pockets
• Elastic cuffs

• 2.5 oz./yd_ (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 3.8 oz./yd_, 100% polyester matte 4-way stretch twill
• 1.8 oz./yd_, 100% polyester stretch dewspo lining 
• 3M Thinsulate premium synthetic insulation
• DWR water-resistant finish
• Three-piece hood with elastic binding at opening
• Stand-up collar
• Front yoke panel without quilting and interior embroidery zipper
• Two-way zipper with easy grab pull
• Interior zippered chest pocket
• Exterior zippered hand pockets
• Elastic cuffs with adjustable tabs
• 1 1/2" drop tail hem
• Adjustable cord lock cinch at hem

• 2.8 oz./yd_ (US), 4.7 oz./L yd (CA), 100% polyester micro poplin
• Wind- and water-resistant
• Scuba collar with hood
• Adjustable bungie drawcord at hood and bottom hem
• Exposed dyed to match nylon coil zipper
• Set-in sleeves
• Lower front on seam pockets
• Encased elastic cuffs
• Champion "C" patch on left sleeve
• Woven label

• Proud member of the U.S. Cotton Trust Protocol.
• Made with OEKO-TEX certified low-impact dyes.
• We reduce plastic waste by the removal of polybags from all products except color White

This product meets the following Sustainable Style subcategories:

Socially Conscious Manufacturing: This product was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 3.5 oz./yd_, 100% water-resistant polyurethane
• 190T 100% polyester taffeta lining
• Natural drawcord
• Hook-and-loop closure pockets at waist

• 6 oz./yd_ (US)/ 10 oz./L yd (CA), 94/6 nylon twill/ spandex
• Three-piece hood with dyed-to-match drawcord
• Center front Dyed-to-match zipper with auto lock slider and rubber toggle
• Right chest and lower zippered pockets
• Inner storage pocket
• Encased elastic cuffs
• Shock cord at hem
• EZEM System for embroidery access

• 1 oz./yd_/39 gsm (US), 1.7 oz./L yd (CA), 100% nylon taslon
• Insulation is 2.7 oz./yd_
• Polyester taffeta lining
• Sleeves are 1.2oz./yd_
• Inner jacket is 2 oz./yd_, 100% polyester woven
• Water-repellant
• Removeable hood with shockcord
• Storm flap with chin guard and hidden metal snaps
• Center front reverse coil zipper
• Right chest and lower zippered pockets
• Center front vislon style zipper with auto lock slider
• Lowered zippered pockets
• Matching Lycra binding at cuffs

• 5.8 oz./yd_, 100% polyester, all season soft shell
• Wind- and water resistant, DWR
• Breathable
• Four-way stretch
• Adjustable three-piece hood designed to contour for a comfortable fit
• Zippered chest and hand pockets
• Auto-lock zipper with easy grab pull
• Adjustable cuff and hem
• Media port

• 7.8 oz./yd_, 100% nylon taffeta outer shell
• 75/13/12 polyester/rayon/cotton grey heather fleece lined body, sleeves and hood
• Water resistant
• Hood with drawcord and sliders
• Set-in sleeves
• Inside storm flap
• Reinforced slash front zippered pockets
• Elastic cuffs and bottom band
• Woven label
  

• 13.8 oz./yd_, (300 gm) 100% waterproof polyester shell bonded to 160gm micro fleece lining
• Waterproof coating: 20,000 mm
• Inner PU coating: breathability/permeability = 5,000
• 3 panel scuba hood
• #5 water-resistant zippers
• Toggles at hood and bottom side seams
• Antique nickel eyelets
• Zippered left chest pocket and welt pockets (Concealed embroidery access for embellishing)
• Media pocket
• Tear away label

• 10 oz./yd_, 80/20 polyester/cotton water-resistant fleece body
• Gunmetal Heather is 100% polyester
• 100% polyester pique contrast panels
• 100% anti-pill polyester face 
• Classic fit
• Removable zip off hood with interior cadet collar
• 1x1 ribbing at cuffs and waistband
• Antique nickel eyelets with antique nickel tipped flat drawcord
• Coil exposed zipper
• Thumbholes at cuffs
• Media pocket & eyelet in front welt pocket
• Tear away label

• 1 oz./yd_/39 gsm (US), 1.7 oz./L yd (CA), 100% nylon taslon
• Insulation is 90 gsm poly fill in body, 40 gsm in sleeves
• Inner jacket is 2 oz//yd_ / 70 gsm, 100% polyester textured woven
• Polyester taffeta lining
• Water-repellent
• Removable hood with shockcord
• Storm flap with chin guard and hidden metal snaps
• Matching Lycra binding at cuffs
• Center front reverse coil zipper
• Right chest and lower zippered pockets
• Tear away label

• 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• Matte finish #4 reverse coil zipper
• Single layer body with fine mesh hood liner
• Three panel hood & scuba neck
• Welt pockets with mesh pocket bags
• Elastic cuffs and waistband
• Self-neck tape with locker loop in center back
• Tear away label