nylon hooded water resistant blue

• 5.2 oz./yd_, 97/3 recycled polymide/elastane
• Durable water resistant - PFC free
• Full-zip closure
• Large front pockets
• Embroidered logo on left chest

• 1 oz./yd_/39 gsm (US), 1.7 oz./L yd (CA), 100% nylon taslon
• Insulation is 2.7 oz./yd_
• Polyester taffeta lining
• Sleeves are 1.2oz./yd_
• Inner jacket is 2 oz./yd_, 100% polyester woven
• Water-repellant
• Removeable hood with shockcord
• Storm flap with chin guard and hidden metal snaps
• Center front reverse coil zipper
• Right chest and lower zippered pockets
• Center front vislon style zipper with auto lock slider
• Lowered zippered pockets
• Matching Lycra binding at cuffs

• 7.8 oz./yd_, 100% nylon taffeta outer shell
• 75/13/12 polyester/rayon/cotton grey heather fleece lined body, sleeves and hood
• Water resistant
• Hood with drawcord and sliders
• Set-in sleeves
• Inside storm flap
• Reinforced slash front zippered pockets
• Elastic cuffs and bottom band
• Woven label
  

• 2.8 oz./yd_ (US), 4.7 oz./L yd (CA), 100% polyester micro poplin
• Wind- and water-resistant
• Half-zip hood with adjustable bungie cord
• Dyed-to-match coil zipper
• Encased elastic cuffs
• Adjustable waist drawcord
• Front entry hidden pouch pocket
• Packs into mesh lined pouch pocket
• Champion "C" patch on left sleeve

• Proud member of the U.S. Cotton Trust Protocol.
• Made with OEKO-TEX certified low-impact dyes.
• We reduce plastic waste by the removal of polybags from all products except color White

This product meets the following Sustainable Style subcategories:

Socially Conscious Manufacturing: This product was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Classic fit
• Unlined hood
• No lining
• Self-neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

• 2.1 oz./yd_, 100% nylon taffeta
• Water resistant
• Hood with drawcord
• Elastic cuffs
• Folds up into its own zippered front pocket
• Set in sleeves
• Open bottom

• 1 oz./yd_/39 gsm (US), 1.7 oz./L yd (CA), 100% nylon taslon
• Insulation is 90 gsm poly fill in body, 40 gsm in sleeves
• Inner jacket is 2 oz//yd_ / 70 gsm, 100% polyester textured woven
• Polyester taffeta lining
• Water-repellent
• Removable hood with shockcord
• Storm flap with chin guard and hidden metal snaps
• Matching Lycra binding at cuffs
• Center front reverse coil zipper
• Right chest and lower zippered pockets
• Tear away label