safety hooded workwear yellow

• 9.5 oz./yd, 80/20 cotton/polyester
• Pre-shrunk
• 2" silver 3M, front and back, laminate striping
• Double-lined hood
• Matching drawstring
  
• Spandex in cuffs and bottom band
• Split pouch pocket

This item uses Bayside style 900

*Please call customer service for availability

• ANSI/ISEA 107 Class 3 certified
• 100% polyester shell and lining
• 8000MM fabric waterproof rating
• Fully waterproof and seam-sealed
• Two-way Vislon zipper
• Hideaway hood
• Storm flap with snap closure
• 2-in. wide reflective taping on front back and sleeves
• Half-elastic adjustable tab cuffs with hook and loop closures
• Interior pocket with hook and loop closure
• Two large lower pockets
• Drawcord waist and hem with toggle adjustability
• Decoration access pocket

• 5.2-ounce 100% polyfill insulation box diamond quilted body and sleeve lining
• Black bottom front and lower sleeves for a cleaner appearance
• Fabric waterproof rating: 5000MM
• Fully seam-sealed
• Adjustable zip-removable rain hood with hook and loop closure and toggles
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility
• Full-length exterior storm flap
• Left chest bellows pocket
• Two open lower front pockets
• Molded center front zippered closure
• Elastic cuffs
• Elastic hem
• Decoration access pocket

• ANSI/ISEA 107 Class 3 certified
• Water resistant 100% PU shell 100% polyester backing
• 8000MM fabric waterproof rating
• Snap-off hood with drawcord and toggle for adjustability
• Two-way black Vislon zipper
• Internal storm flap
• Half-elastic adjustable tab cuffs with hook and loop closures
• 2-in. wide reflective taping on front back and sleeves
• Two welt pockets
• Drawcord hem with toggle adjustability
• This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

• 9 oz./yd, polyester sweatshirt material
• Black lower body and sleeves help keep a clean appearance
• Black ribbed-knit cuffs
• 2 wide high-performance reflective material
• Lower outside slash pockets

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• ANSI/ISEA 107 Class 3 certified
• 100% polyester shell 100% polyester quilted lining
• 6-ounce polyfill-lined body 4-ounce polyfill-lined sleeves
• 8000MM fabric waterproof rating
• Fully seam-sealed for additional waterproof protection
• Snap-off adjustable hood
• Drawcord waist with toggles
• Storm flap
• 2-in. wide reflective taping on front back and sleeves
• Two-way zipper
• Waterproof zippered pockets
• Hand warmer pocket
• Bellow pockets
• Molded adjustable tab cuffs with hook and loop closures
• Interior MP3 player pocket
• Port Pocket for easy embroidery access

• Flame-resistant, 10.5 oz./yd (355 g/m), 67% Modacrylic/ 29% Cotton/ 4% Polyester
• 360 visibility with front and back 2" flame resistant heat seal silver reflective striping
• Hood with drawcord closure
• Rib knit cuff and waistband
• Large hand warmer pocket, concealed utility pocket inside front pocket
• IQ reinforcement at interior of sleeves

Tall sizes available under style SMH4T

• 4.6-ounce 100% poly microfleece upper body lining
• 3-ounce quilted polyfill lower body lining
• 2-ounce quilted polyfill hood and sleeve lining
• Black bottom front and lower sleeves for a cleaner appearance
• Fabric waterproof rating: 5000MM
• Fully seam-sealed
• Adjustable rain hood
• Durable reflective 2-inch tape meets ANSI 107 requirements
• Full-length exterior storm flap
• Left chest pocket
• Right chest pocket
• Two lower front pockets
• Center front zippered pocket to hold a tablet
• Mic clips at shoulders
• Elastic cuffs
• Elastic hem
• Decoration access pocket

• Polyester
• Durable waterproof seam sealed shell with thermal insulation
• 2 wide reflective material with 3 contrasting panels
• Detachable hood
• Black bottom front & sleeves
• Lower slash pockets angled
• Left chest radio pocket with flap and D-ring

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 100% polyester lining
• Black bottom front and lower sleeves for a cleaner appearance
• Shell's fabric waterproof rating: 5000MM
• Fully seam-sealed shell
• Adjustable rain hood
• Durable reflective 2-inch tape meets ANSI 107 requirements
• Full-length interior and exterior storm flaps
• Vented cape back
• Right chest pocket and retractable ID holder
• Two lower front pockets
• Center front zippered pocket to hold a tablet
• Gusseted cuffs
• Elastic hem
• Decoration access pocket in shell
• Non-ANSI 8.6-ounce 100% polyester inner full-zip hoodie
• Hoodie can be attached inside shell

• 4.28 oz./yd, 82/18 polyester/spandex Cooling Fabric, 135gsm, Lime
• Contrast is 82/18 polyester/spandex Cooling Fabric, 135gsm, Black
• Underarm contrast panel is 88/12 polyester/spandex Jacquard Micro Mesh, 145gsm, Lime
• Premium Kishigo Cool Touch fabric with moisture wicking and anti-odor properties
• Micro-mesh contrast on under sleeve
• Increased transfer rate of nearly 7% of total heat loss (Qt) value compared to the competition
• Lightweight hood
• 2 wide 4-way stretch high performance breathable reflective material
• Black bottom design
• Left and right thumbholes inserted within sleeve
• Innovative construction
• Left chest welt pocket
• Sun protection UPF 50+ premium Cool Touch fabric/UPF 15+ micro-mesh
• Heat sealed label

ANSI/ISEA 107-2020 Type R Class 3