Page 3: Custom embroidered yellow hooded

• 10-ounce 85/15 cotton/polyester fleece
• 60/40 cotton/polyester fleece (Bright Yellow)
• Anti-abrasion
• Unlined 3-panel hood with dyed-to-match drawcords
• Cadet collar with heavy-duty YKK metal zipper
• Front pocket with concealed interior phone pocket
• Reinforced triple-needle stitching and bar tacks at pockets

• 100% PU-coated polyester
• 100% polyester mesh-lined body and hood
• 100% polyester-lined sleeves
• 1500MM fabric waterproof rating
• Attached hood with adjustable locking drawcord
• Molded zipper
• Grommets for breathability under arms
• Adjustable self-fabric tab cuffs with hook and loop closures and reflective detail
• Front zippered pockets with reflective detail
• Port Pocket for decoration access

• 5.5-ounce 100% polyester
• Three-panel hood with a solid dyed-to-match drawcord
• Solid self-fabric hood lining
• Taped neck
• Self-fabric cuffs and hem
• Front pouch pocket

• 7.8-ounce 50/50 cotton/poly fleece
• Air jet yarn for softness
• No drawcord at hood
• Tear-away label

• 6.8-ounce 80/20 cotton/polyester
• 78/22 cotton/polyester (Ash)
• 75/25 cotton/polyester (Athletic Heather)
• 50/50 cotton/polyester (Heathers Neon Pink)
• 100% cotton face (Solids)
• Unlined hood
• No drawcord
• 1x1 rib knit cuffs and hem

• ANSI/ISEA 107 Class 3 certified
• 100% polyester shell and lining
• 8000MM fabric waterproof rating
• Fully waterproof and seam-sealed
• Two-way Vislon zipper
• Hideaway hood
• Storm flap with snap closure
• 2-in. wide reflective taping on front back and sleeves
• Half-elastic adjustable tab cuffs with hook and loop closures
• Interior pocket with hook and loop closure
• Two large lower pockets
• Drawcord waist and hem with toggle adjustability
• Decoration access pocket

• Garment-dyed for a lived-in feel
• Jersey-lined hood
• Natural-colored flat drawcord (White flat drawcord on White)
• 1x1 rib knit cuffs and waistband
• Signature twill label and back neck tape
• Rolled forward shoulder
• Relaxed fit seamless body

• 5.2-ounce 100% polyfill insulation box diamond quilted body and sleeve lining
• Black bottom front and lower sleeves for a cleaner appearance
• Fabric waterproof rating: 5000MM
• Fully seam-sealed
• Adjustable zip-removable rain hood with hook and loop closure and toggles
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility
• Full-length exterior storm flap
• Left chest bellows pocket
• Two open lower front pockets
• Molded center front zippered closure
• Elastic cuffs
• Elastic hem
• Decoration access pocket

• 9 oz./yd, 100% polyester fleece
• 5 oz./yd, thermal lining
• Double-layered three-piece hood
• Nylon front zipper
• Oversized front pockets
• Reinforced bartacks at stress points
• Double-needle stitched main seams

• 8.6-ounce 100% polyester smooth-faced fleece
• Black bottom front and cuffs for a cleaner appearance
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
• Three-panel hood with drawcord closure
• Taped neck
• Front pouch pocket

• 7 oz./yd, 55/45 cotton/polyester burnout fleece
• Acid washed with silicone finish
• Flatlock-stitched throughout
• Dyed-to-match drawcord
• V-notch collar
• Raw-edge seams around hood opening, shoulders, pocket seams, cuffs, waistband and side seams
• Raglan sleeves
• Pouch pocket
  

• 8.6-ounce 100% polyester smooth-faced fleece
• Black bottom front and cuffs for a cleaner appearance
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
• Three-panel hood with drawcord closure
• Taped neck
• Front pouch pockets
• Molded center front zippered closure
• Rib knit cuffs and hem

• ANSI/ISEA 107 Class 3 certified
• Water resistant 100% PU shell 100% polyester backing
• 8000MM fabric waterproof rating
• Snap-off hood with drawcord and toggle for adjustability
• Two-way black Vislon zipper
• Internal storm flap
• Half-elastic adjustable tab cuffs with hook and loop closures
• 2-in. wide reflective taping on front back and sleeves
• Two welt pockets
• Drawcord hem with toggle adjustability
• This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

• 5-ounce 100% polyester
• Snag-proof
• Moisture-wicking
• Odor-fighting
• Chlorine-resistant
• UPF rating of 30
• Three-panel hood
• Reinforced triple-needle stitching at shoulders and armholes
• Rib knit cuffs
• Drop tail hem
• Tear-away label

• 7 oz./yd, 100% polyester moisture-management fleece fabric
• Badger Sport paneled shoulder for maximum movement
• Textured waffle weave side and underarm panels
• Poly rib cuff and waist
• No drawcord
• Pouch pocket with two hook and loop closure top pockets
• Embroidered Badger logo on left sleeve

• 9 oz./yd, polyester sweatshirt material
• Black lower body and sleeves help keep a clean appearance
• Black ribbed-knit cuffs
• 2 wide high-performance reflective material
• Lower outside slash pockets

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• ANSI/ISEA 107 Class 3 certified
• 100% polyester shell 100% polyester quilted lining
• 6-ounce polyfill-lined body 4-ounce polyfill-lined sleeves
• 8000MM fabric waterproof rating
• Fully seam-sealed for additional waterproof protection
• Snap-off adjustable hood
• Drawcord waist with toggles
• Storm flap
• 2-in. wide reflective taping on front back and sleeves
• Two-way zipper
• Waterproof zippered pockets
• Hand warmer pocket
• Bellow pockets
• Molded adjustable tab cuffs with hook and loop closures
• Interior MP3 player pocket
• Port Pocket for easy embroidery access

• 5.5-ounce 100% polyester smooth-faced fleece
• Moisture-wicking
• Black bottom front and lower sleeves for a cleaner appearance
• Three-panel hood with drawcord adjustable closure
• Taped neck
• Front pouch pocket

• 9 oz./yd, 100% polyester fleece
• 5 oz./yd, 100% polyester mesh lining
• Double-lined three-piece hood
• Nylon front zipper
• 2" reflective tape
• Oversized front pockets
• Knit cuffs and waistband

• UPF rating of 30
• Hat- and helmet-compatible 3-panel hood
• Segmented durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and easy movement