Page 18: Custom embroidered long sleeve

• 6.5 oz./yd, 100% ringspun cotton
• Oxford is 90/10 cotton/polyester
• Charcoal Heather is 60/40 cotton/polyester
• Split front placket with six sewn eyelets
• Flat white drawcord with grey ticking
• Pouch pocket
• 1x1 rib cuffs, waist and side gussets
• Add interchangeable laces to this style (style 8831)

• Flame-resistant, 6.5 oz./yd (220 g/m), with moisture management finish, 45% Modacrylic/ 35% Lyocell/ 20% Aramid
• Rib knit collar and cuffs
• Tagless
• Raglan sleeves
• Full side seam gusset
• Heat seal Bulwark triangle centered at neck to show wearer has on FR undergarment
• Industrial Laundry - Light Soil, Home Wash

• 3.8-ounce 100% polyester interlock with sublimated digi camo print
• Removable tag for comfort and relabeling

• 8.5 oz./yd, (280gm) 60/35/5 cotton/polyester/spandex
• Four-way stretch French Terry fabric for increased mobility
  
• Standard fit
• 100% ring-spun cotton face yarns for printability
• Pre-laundered fabric to reduce shrinking
• Sewn eyelets
• Flat drawcord with capped tip
• Double layer 3-panel hood
• 320gm 1x1 ribbing at cuff and waistband
• Hidden welt pockets
• Tear away label

• 7.4 oz./yd, 100% polyester wicking double knit mesh texture
• Dry Excel moisture management properties
• Pinhole mesh lined hood
• Drawcord
• High collar
• Front zippered pocket
• Pouch pocket
• Raglan sleeves
• Half-elastic cuffs
• Woven label

• 3-ounce 100% cotton slub chambray
• Open collar
• Back shoulder pleats
• Double chest pockets with buttons

• Exclusively with Westex G2 fabrics by Milliken - Flame-resistant, 7.5 oz./yd (255 g/m2), 70% Cotton/ 30% Polyester
• Four-button placket
• Dyed to match rib knit henley collar
• Set-in sleeves
• Dyed to match rib knit cuffs
• Chest pocket
• Fabric is moisture wicking and breathable
• iQ reseller hang tag
• Industrial Laundry - Light Soil, Home Wash

Regular sizes available under style QT40

• 11 oz/yd / 375 gsm, 60% BCI cotton, 40% recycled polyester textured knit
• The cotton content in this style is sourced from a verified member of the Better Cotton Initiative (BCI). BCI members support more sustainable cotton farming via a system of mass balance.
• Center front reverse coil zipper with faux leather toggle
• 2x2 rib knit at collar, cuffs, zipper placket, and hem

Responsible Materials: contains 40% recycled polyester and 60% BCI cotton

Responsible Manufacturing: the company that makes this product is a member of the Fair Labor Association.

• 8.9 oz./yd, 70/30 cotton/recycled polyester
• Regular fit
• Pouch pocket
• adidas embroidered logo on left sleeve
• Woven label

Responsible Manufacturing: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified, and the company that makes this product is Fair Labor Accredited.

• 7 oz./yd, 55/45 cotton/polyester burnout fleece
• Acid washed with silicone finish
• Flatlock-stitched throughout
• Dyed-to-match drawcord
• V-notch collar
• Raw-edge seams around hood opening, shoulders, pocket seams, cuffs, waistband and side seams
• Raglan sleeves
• Pouch pocket
  

• 7.4 oz./yd.,100% polyester
• UA Storm technology repels water (uses a fluorine-free water repellent treatment)
• Updated Armour Fleece is slightly heavier
• Loose fit
• Front pouch pocket
• Binding trim at cuffs
• Contrast embroidered logo on upper sleeve

• 4.1-ounce 100% polyester birdseye mesh
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
• 1x1 rib knit neck
• Back neck tape
• Left chest pocket

• 5 oz./yd / 172 gsm (US), 8.4 oz/Lyd (CA), 100% polyester face plaited to 60/40 polyester/cotton back (total overall garment 61/39 polyester/cotton)
• Proprietary dual-sided mesh pique knit constructed of fine denier wicking polyester on the outside and soft-as-cotton wicking blend on the inside
• Active fit
• Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
• UPF 15-39 protection
  
• Luxury, comfort and performance in one
• Matching flat-knit collar
• Three-button placket with dyed-to-match buttons
• Side vents

• 8.5 oz./yd, 91/9 recycled polyester/spandex
• Breathable PrimoLite mesh
• Moisture-management properties
• UPF 30+ protection
• Precise active fit
• Low profile ANETIK logo on right shoulder
• Zippered pocket on back right side
• Heat-seal label

• 10 oz./yd, 80/20 ring-spun cotton/polyester
• Three piece sport construction hood to allow for decoration
• Sport shoulder panels
• Split front placket with six sewn eyelets
• Thick white flat lace drawcord
• 2x2 ribbed side gussets and panels
• Interchangeable custom-color laces can be ordered separately (style 8831)

• 4.1-ounce 100% polyester birdseye mesh
• UPF rating of 30
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body
• 1x1 rib knit neck
• Back neck tape
• Left chest pocket

• 3-ounce 60/40 cotton/poly
• Button-down collar
• Back box pleat
• Left chest pocket
• Pearlized buttons

• 3.3-ounce 100% polyester
• Stain release
• Odor-fighting
• Moisture-wicking
• Wrinkle-resistant
• Open collar
• French placket
• Dyed-to-match buttons
• Left chest pocket
• Rounded adjustable cuffs

• 5.1-ounce 87/13 polyester/spandex with PosiCharge technology
• Moisture-wicking
• Odor-fighting
• UPF rating of 50

• 12.5 oz./yd (420gm), 75/25 ring-spun cotton/polyester 3-end fleece with 100% cotton face yarns on solid colors, 21 singles
• Grey Heather is 52/48 ring-spun cotton/polyester
• Premium heavyweight
• Specialty yarns for a durable dry hand feel
• Oversized fit
• Drop shoulder
• No drawcord
• Double layer single piece hood
• #5 nickel kissing zipper
• Blindstitch sewing on all seams for an understated simplified design
• 100% cotton 1x1 ribbing at cuff and waistband
• Tear away label (woven label on Pigment Black)