Custom embroidered fashion outerwear gray

• 8 oz./yd_ (US), 13.4 oz/L yd (CA), 100% recycled polyester
• Waffle textured shoulder panels and back
• Two front zipper pockets
• Open hem cuffs and bottom hem
• Contrast adidas logo on right sleeve

• 100% 380T coated nylon shell
• Polyester fill
• Classic fit
• Water- and wind-resistant
• Binding trim at cuffs and hem
• Exposed nylon zipper with pull tab at center front and collar
• Zippered welt pockets
• Folds and stows into separate neck pillow stored in collar

• 2.5 oz./yd_ (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water resistant coating
• Waterproof Pressure Resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 8 oz./yd_ (US), 13.4 oz/L yd (CA), 100% recycled polyester
• Waffle textured shoulder panels and back
• Two front zipper pockets
• Open hem cuffs and bottom hem
• Contrast adidas logo on right sleeve

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 550 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Front side-entry zippered pockets
• Interior pockets
• Elastic windproof cuffs
• Folds and stows into separate pouch

• 100% nylon 330D with Interior PU waterproof coating
• Nylon Outer Shell: Waterproof Coating = Level 3
• Inner PU Coating: Breathability/Permeability = 5,000
• Water Pressure Resistance = 10,000 mm
• DTM neck taping
• #5 DTM body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• 3 panel hood
• Scuba neck
• Round poly drawstring
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

"CLICK HERE to watch product video"

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 650 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Elastic windproof armholes
• Front pockets with side entry
• Interior pockets
• Folds and stows into separate pouch

• 82 Gm 100% polyester fabric with interior water resistant coating
• Waterproof Pressure Resistance: 600 mm
• No lining 
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 6.5 oz./yd_,100% polyester fleece
• Regular fit
• Two stripes down raglan sleeves
• 1x1 ribbing at cuffs & waistband
• Coil kissing zipper
• Twill neck tape
• Media pocket and eyelet
• Tear away label

• 5 oz./yd_, 92/8 nylon/spandex shell
• Unlined
• Classic fit
• Water- and wind-resistant
• Exposed black nylon zipper with pull tab at center front
• Zippered welt pockets

• 3 oz./yd_, polyester fill,100% nylon with diamond quilt pattern
• Contrast lining
• Covered nylon zipper with metal logo pull
• Slight high low hem with side vents

• 3 oz./yd_ polyester fill, 100% 380T coated nylon shell
• Wind- and water-resistant
• Diamond quilted design
• Ribbed-knit collar, cuffs and waistband
• Nylon zipper with metal zipper pull
• Open welt pockets
• Folds and stows into separate pouch

• 2.9 oz./yd_ (US) 4,83 oz./L yd (CA),100% polyester fabric with interior water resistant coating
• 100% Polyester 1x1 Ribbing
• Waterproof Pressure Resistance: 600 mm
• Single layer, no lining 
• Matte Plastic #5 Zipper
• Self Neck Tape
• Welt Pockets
• Locker loop in center back
• Tear away label

• 100% nylon 33D with waterproof coating
• Nylon outer shell: level 3 waterproof coating
• Inner PU coating: breathability/permeability= 5,000
• Water pressure resistance= 10,000
• Standard fit
• No lining
• Self neck tape
• Antique brass eyelets
• Antique brass 6 snap front closure
• Elastic cuffs
• Underarm grommets
• Drawcord closure at bottom opening
• Tear away label

*Color Black/ Black is all black as pictured

"CLICK HERE to watch product video"

• 100% nylon 330D with Interior PU waterproof coating
• Nylon Outer Shell: Waterproof Coating = Level 3
• Inner PU Coating: Breath-ability/ Permeability = 5,000
• Water Pressure Resistance = 10,000 mm
• Standard fit
• Unlined hood
• No lining
• Self neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

"CLICK HERE to watch product video"

• 9.5 oz./yd_
• High loft polyester sherpa
• Quarter-zip placket and self-fabric collar
• Set-in sleeves and side seam waist vents

• 8.5 oz./yd_, 80/20 cotton/polyester sueded fleece
• 100% cotton face
• Snap front closure
• Gunmetal grey snaps with embossed "C" logo
• Front slash pockets
• Dyed-to-match jersey locker patch
• Champion "C" patch on left sleeve

• 10 oz./yd_, 70/30 polyester/cotton quilted jersey
• Polyester filling
• Self fabric collar
• Full placket with seven metal snaps
• Set-in check pockets
• Self fabric cuffs with snap
• Welt side pockets

• 100% Nylon, exterior shell
• 100% polyester lining, 60 gm Hyper-Loft poly fill insulation
• Water & wind resistant 
• #5 reverse coil zippers at chest and pockets
• Packable pocket with #3 reverse coil zipper
• Capped elastic sleeve cuff
• Locker loop at wearers back neck
• Plastic cinche toggle at wearers right side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 6.5 oz./yd_, 66/21/13 polyester/cotton/rayon lining
• Water-resistant
• 100% polyester shell
• Interior zippered pocket
• Lining Saver System