Page 5: Custom embroidered hooded outerwear full zip

• Polyester
• Durable waterproof seam sealed shell with thermal insulation
• 2 wide reflective material with 3 contrasting panels
• Detachable hood
• Black bottom front & sleeves
• Lower slash pockets angled
• Left chest radio pocket with flap and D-ring

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 100% polyester lining
• Black bottom front and lower sleeves for a cleaner appearance
• Shell's fabric waterproof rating: 5000MM
• Fully seam-sealed shell
• Adjustable rain hood
• Durable reflective 2-inch tape meets ANSI 107 requirements
• Full-length interior and exterior storm flaps
• Vented cape back
• Right chest pocket and retractable ID holder
• Two lower front pockets
• Center front zippered pocket to hold a tablet
• Gusseted cuffs
• Elastic hem
• Decoration access pocket in shell
• Non-ANSI 8.6-ounce 100% polyester inner full-zip hoodie
• Hoodie can be attached inside shell

• 13.8 oz./yd, (300 gm) 100% waterproof polyester shell bonded to 160gm micro fleece lining
• Waterproof coating: 20,000 mm
• Inner PU coating: breathability/permeability = 5,000
• 3 panel scuba hood
• #5 water-resistant zippers
• Toggles at hood and bottom side seams
• Antique nickel eyelets
• Zippered left chest pocket and welt pockets (Concealed embroidery access for embellishing)
• Media pocket
• Tear away label

• 100% nylon, Dobby 3K
• Lining is 100% recycled polyester fleece
• Regular fit
• Omni-Shield water and stain repellent
• Drawcord-adjustable hood and hem
• Elastic cuffs
• Zippered hand pockets
• Packable into hand pocket
• Woven label

• 4.13 oz/yd., 100% recycled polyester
• 100% waterproof & breathable 2.5-layer, durable bonded fabric with fully taped seams
• UA Storm technology repels water without sacrificing breathability
• Loose fit: comfortably away from the skin
• Full zip front with storm flap
• Bungee adjust on back of hood
• Secure, zip hand pockets
• Adjustable cuffs for a secure fit
• 10k/10k rating
• Pad-printed label

• 3 oz./yd, 100% post-consumer recycled polyester ripstop
• Regular fit
• 2.5L NanoPro waterproof
• 100% seam-taped for complete leak proof protection
• Fixed hood with peripheral cord adjustment
• Tricot lined chin guard for comfort
• Pit zippers for ventilation
• Center front zipper with storm flap
• Zippered hand pockets
• VELCRO cuffs
• Adjustable drawcord hem
• Folds up into left zippered hand pocket
• DTF logo on left chest and top of hood

• 7.1 oz./yd., 100% polyester
• Lightweight 80gsm insulation
• STORM + Ripstop Face, HYBRID STORM stretch paneling for enhanced mobility
• Interior quilting pattern
• Zip secured hand pockets
• Attached hood
• Contrast heat-transfer logo on left chest

• Exclusive StormRepel durable water-repellent (DWR) technology keeps you warmer and drier
• Attached hood and princess seams
• Front tricot-lined zippered pockets reverse coil zippers open cuffs and open hem
• Decoration access pocket
• Reflective Eddie Bauer logo heat transfer on right hem
• Made of 100% polyester knit shell with DWR coating bonded to a water-resistant laminated film insert

• 8.9-ounce 77/23 cotton/poly
• 3-panel hood
• OGIO heat transfer label for tag-free comfort
• Reverse coil zipper with black metal pull with debossed O
• Raglan sleeves
• Slash pockets
• Black reflective O heat transfer on front left hem

• 14.5 oz./yd, 100% recycled polyester
• Regular fit
• Fully seam sealed construction
• Waterproof
• Adjustable hood with shower cap to keep the hood in position
• Full-zip front and adjustable hem with bungee and stopper
• Zippered pocket on font left
• Partially elasticated cuffs
• Reflective adidas logo on left chest
• TERREX logo on right arm
• Woven label

Responsible Manufacturing: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified, and the company that makes this product is Fair Labor Accredited.

• 8.6-ounce 95/5 poly/spandex with stay-cool wicking technology
• OGIO heat transfer label for tag-free comfort
• OGIO embossed neck taping
• Black binding around hood and cuffs
• Black reverse-coil locking zipper with chin guard
• Ventilating perforation on center back
• Reflective O on back right shoulder
• Front pockets with mesh lining
• Thumbholes
• Curved back hem

• 9.7-ounce 96/4 poly/cotton knit shell
• 9.7-ounce 96/4 poly/cotton jacquard knit insets
• Locking reverse coil zipper
• 3-panel hood
• Drop shoulder
• Open pockets
• Longer length
• Curved front hem
• Split back drop tail hem

• 90/10 polyester/spandex
• Bonded softshell upper body and sleeves
• 100% polyester channel puffer with 3 oz. polyfill
• Water-resistant
• Three-piece hood with scuba collar and inside drawcords
• Adjustable cuffs
• Zippered hand pockets

• 100% polyester all season soft shell
• Wind- and water-resistant, DWR finish
• Breathable
• Four-way stretch
• Adjustable three-piece hood designed to contour for a comfortable fit
• Zippered chest and hand pockets
• Auto-lock zipper with easy grab pull
• Thumbhole on cuffs
• Media port

• 7 oz/yd / 240 gsm, 100% polyester fleece
• Cationic dyes for superior brightness and color fastness
  
• Textured polyester waffle fleece inset at hood, bodice, sleeves and inner pocket
• Team fit
• Moisture wicking performance pulls sweat away from the skin to keep you dry and comfortable
• Easy Care for machine wash, dryer friendly, and needs little to no ironing
• Three-piece lined hood and pocket
• Center front coil zipper with chin guard
• Tear away label

• 3.7 oz./yd, (US), 6.2 oz./L yd (CA), 100% polyester fully seam-sealed, two-layer waterproof and breathable shell
• 3.2 oz./yd (US), 5.3 oz./L yd (CA), 100% polyester dyed-to-match micro-mesh lining throughout
• Two-layer bonded fabric construction for lightweight structure and breathability
• Team fit
• Seam sealed with fused taping for complete waterproof weather protection. 6,000 mm waterproof rating
• Fabric breathability properties allow for heat and moisture transfer for cool and dry comfort. 6,000 g breathability rating
• Windsmart technology fabrication, made with barrier for windy conditions
• Rollaway three-piece hood with rain bill
• Waterproof reverse coil zipper at center front and pockets with semi-autolock rubber pull tabs
• Black contrast side panels
• Reflective tape at right-chest and front pockets
• Hook and look hem closures at cuffs
• Drop-tail hem and elastic shockcord

• 4.5-ounce (153 GSM)
• 70/30 combed ring spun cotton/polyester French terry 40 singles
• Unlined hood
• Zip-through collar
• Dyed-to-match drawcords
• YKK Metaluxe zipper
• Set-in sleeves
• Front pockets
• 2x1 rib knit cuffs and hem

• Constructed of bluesign approved materials
• 53% recycled Pertex Quantum Eco 100% polyester ripstop shell and lining
• 15.1-ounce RDS-certified 700+ fill-power down insulation throughout body
• 85% recycled VerticalX Eco insulation in collar and shoulders to eliminate cold spots and increase weather resistance in these exposed areas
• Adjustable hood
• Slightly longer body length
• Zippered hand pockets
• Packable left hand pocket doubles as a vest stuff sack
• Suede patch with contrast OR logo on left hem
• Open left chest for decoration

• 100% polyester knit shell with a durable water-repellent (DWR) coating bonded to a water-resistant film insert and a 100% polyester brushed tricot interior
• 5000MM fabric waterproof rating
• 5000G/M2 fabric breathability rating
• Longer silhouette
• Removable three-panel hood with drawcord and toggles
• Set-in sleeves
• Coated reverse coil center front zipper
• Front reverse coil zippered pockets
• Elastic binding at cuffs
• Thumbholes for warmth

• 1 oz./yd/39 gsm (US), 1.7 oz./L yd (CA), 100% nylon taslon
• Insulation is 90 gsm poly fill in body, 40 gsm in sleeves
• Inner jacket is 2 oz//yd / 70 gsm, 100% polyester textured woven
• Polyester taffeta lining
• Water-repellent fabric finish prevents moisture penetration in wet conditions
• UTK 2 designed for moderately cold temperatures, recommended for temperatures between 33F as -4F (1C to -20C)
• EZ Away System features versatile, detachable elements that transform the garments use & functionality
• Removable hood with shockcord
• Storm flap with chin guard and hidden metal snaps
• Matching Lycra binding at cuffs
• Center front reverse coil zipper
• Right chest and lower zippered pockets
• EZEM System designed for easy embroidery access
• Tear away label