Custom embroidered hooded outerwear wind resistant

• 3.4 oz./yd, 87/13 recycled polyamide/elastane
• Regular fit
• DWR finish
• Wind-resistant
• Hooded
• Front pockets
• Elastic cuffs
• Embroidered performance logo on lower left hem

Responsible Manufacturing: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified, and the company that makes this product is Fair Labor Accredited.

• 3 oz./yd, 100% post-consumer recycled polyester ripstop
• Regular fit
• 2.5L NanoPro waterproof
• 100% seam-taped for complete leak proof protection
• Fixed hood with peripheral cord adjustment
• Tricot lined chin guard for comfort
• Pit zippers for ventilation
• Center front zipper with storm flap
• Zippered hand pockets
• VELCRO cuffs
• Adjustable drawcord hem
• Folds up into left zippered hand pocket
• DTF logo on left chest and top of hood

• 2.5 oz./yd, Micro polyester
• Wind- and water-resistant
• Adjustable hood with concealed cord locks
• Spandex bound cuffs
• Front zippered pockets
• Zippered pocket on left sleeve
• Reflective trim
• Open bottom with adjustable concealed drawcord
• Back vent with adjustable closure for full decoration access
• Packs up in utility pocket on left sleeve
• Woven label

• 2.36 oz./yd, 100% polyester
• StormShield water-resistant, DWR finish
• Easy to pack jacket into built-in packable pocket pouch
• Packable hood with hidden drawcords
• Zippered hand pockets
• Elastic cuffs

• 4.13 oz/yd., 100% recycled polyester
• 100% waterproof & breathable 2.5-layer, durable bonded fabric with fully taped seams
• UA Storm technology repels water without sacrificing breathability
• Loose fit: comfortably away from the skin
• Full zip front with Storm flap
• Bungee adjust on back of hood
• Secure, zip hand pockets
• Adjustable cuffs for a secure fit
• 10k/10k rating
• Pad-printed label

• 2.5 oz./yd (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• Wind and water resistant
• Adjustable hood
• Dyed-to-match nylon coil zipper
• Elastic cuffs
• Champion 'C' logo on left sleeve
• Woven back neck label
• 1/2-zip
• Front-entry hidden pouch pocket
• Packs into mesh-lined pouch pocket

• 8.55 oz./yd., 100% polyester durable ripstop fabric
• High pile sherpa lining
• Eco Storm DWR
• Rib collar for ideal fit
• Smooth fabric in sleeves make it easy to pull on/off
• Two secure-zippered covered horizontal pockets and two open-angled hand pockets
• Rib finish sleeve cuff and bottom hem blocks the wind and cold

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Classic fit
• Unlined hood
• No lining
• Self-neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

• 8 oz./yd, polyester softshell bonded to micro fleece
• Water-and wind-resistant
• 2" reflective tape
• Breathable
• Zippered front pockets
• ANSI/SEA 107-2015 Type R Class 3 Certified
  

• 100% polyester
• 4 layer filtration system provides basic protection against non-toxic dust, smoke and other non-toxic particles found on the job site
• Concealed reflective piping along hood, front and back chest seams for better low light visibility
• Thumbhole on cuffs
  
• Durable lightweight lime water-resistant ripstop shell with lining
• Adjustable hood
• 2 wide high-performance reflective tape
• Durable black water-resistant ripstop in high-wear areas, along the sides and under the arms
• Tall collar design with asymmetrical zipper to avoid chaffing
• Left chest pocket with a zipper closure
• Lower slash pockets with a zipper closure

• 4.13 oz/yd., 100% recycled polyester
• 100% waterproof & breathable 2.5-layer, durable bonded fabric with fully taped seams
• UA Storm technology repels water without sacrificing breathability
• Loose fit: comfortably away from the skin
• Full zip front with storm flap
• Bungee adjust on back of hood
• Secure, zip hand pockets
• Adjustable cuffs for a secure fit
• 10k/10k rating
• Pad-printed label

• 3 oz./yd, 100% post-consumer recycled polyester ripstop
• Regular fit
• 2.5L NanoPro waterproof
• 100% seam-taped for complete leak proof protection
• Fixed hood with peripheral cord adjustment
• Tricot lined chin guard for comfort
• Pit zippers for ventilation
• Center front zipper with storm flap
• Zippered hand pockets
• VELCRO cuffs
• Adjustable drawcord hem
• Folds up into left zippered hand pocket
• DTF logo on left chest and top of hood

• 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• Matte finish #4 reverse coil zipper
• Single layer body with fine mesh hood liner
• Three panel hood & scuba neck
• Welt pockets with mesh pocket bags
• Elastic cuffs and waistband
• Self-neck tape with locker loop in center back
• Tear away label

• 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• Matte finish eyelets and zippers
• #4 zipper with zipper pull
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label