Page 2: Custom embroidered performance outerwear hooded

• 2.7 oz./yd_ (US), 4.5 oz./L yd (CA), 100% 240T polyester
• Lining: 100% polyester mesh in upper back
• Water resistant finish
• Roll-away hood
• Adjustable cuffs with tabs
• Adjustable shock-cord at hood and hem
• Vented back yoke

• Liner Jacket Lining: 100% polyester taffeta
• Shell: 3.5 oz./yd_ (US), 5.8 oz./L yd (CA), 100% nylon 228T taslan
• Lining:100% polyester mesh in upper body
• UTK 3 temperature range, 30F to -9F / -1C to -23C
• Storm flap with security zippered pocket
• Inside placket
• Thermal retention shockcord at waist, hem and hood
• Zip-off hood
• reflective piping along yoke
• adjustable cuffs with tabs
• EZEM system

• Body: 6 oz./yd_/200 gsm (US), 10 oz./ L yd (CA), 3-Layer 100% polyester interlock bonded to polyester birdseye with inner membrane
• Contrast: 1 oz. polyester shell with polyester Lining in front & back hybrid panels
• Insulation: 2.3 oz. poly fill in front & back hybrid panels
• 8,000 mm waterproof rating
• 1,000 g breathability rating
• Center front reverse coil zipper, with rubber toggle
• Zippered pockets at lower front, and left sleeve
• Reflective piping details
• Tear away main label

• 1 oz./yd_ (US), 1.7 oz./L yd (CA), 100% recycled nylon
• Lining: 100% polyester taffeta
• Insulation: 5.6 oz./yd_, 100% polyester UTK SubDown fill
• Water-repellent, water-resistant
• Shock cord at hood
• Center front placket with metal snap closure
• Dyed-to-match jersey binding at shoulders, sleeves, cuffs and bottom hem
• Self-fabric cuffs with adjustable metal snap closure
• Lower zippered pockets
• Packable style; folds into zippered pouch pocket 

• 7.8 oz./yd_, 100% nylon taffeta outer shell
• 75/13/12 polyester/rayon/cotton grey heather fleece lined body, sleeves and hood
• Water resistant
• Hood with drawcord and sliders
• Set-in sleeves
• Inside storm flap
• Reinforced slash front zippered pockets
• Elastic cuffs and bottom band
• Woven label
  

• 2.8 oz./yd_ (US), 4.7 oz./L yd (CA), 100% polyester micro poplin
• Wind- and water-resistant
• Half-zip hood with adjustable bungie cord
• Dyed-to-match coil zipper
• Encased elastic cuffs
• Adjustable waist drawcord
• Front entry hidden pouch pocket
• Packs into mesh lined pouch pocket
• Champion "C" patch on left sleeve

• Proud member of the U.S. Cotton Trust Protocol.
• Made with OEKO-TEX certified low-impact dyes.
• We reduce plastic waste by the removal of polybags from all products except color White

This product meets the following Sustainable Style subcategories:

Socially Conscious Manufacturing: This product was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

• 3.1 oz./yd_ (US), 5.2 oz./L yd (CA), 100% nylon oxford with water-resistant finish
• Trim: 100% polyester dobby
• Lining: 100% polyester taffeta
• Inner Jacket: 8.1 oz/yd_, 100% polyester anti-pill spun fleece
• UTK 2 temperature range:; 34F to -3F / 1C to -20C
• Snap-off hood
• Storm flap
• Thermal retention shockcord at hood and hem
• Adjustable cuffs with tabs
• Front yoke with piping

• 13.8 oz./yd_, (300 gm) 100% waterproof polyester shell bonded to 160gm micro fleece lining
• Waterproof coating: 20,000 mm
• Inner PU coating: breathability/permeability = 5,000
• 3 panel scuba hood
• #5 water-resistant zippers
• Toggles at hood and bottom side seams
• Antique nickel eyelets
• Zippered left chest pocket and welt pockets (Concealed embroidery access for embellishing)
• Media pocket
• Tear away label

• 3.9 oz./yd_/132 gsm (US), 6.5 oz./L yd (CA)
• SHELL: 100% polyester twill, with water resistant and cire finish
• SHELL LINING; Polyester taffeta
• LINER JACKET: 7.7 oz Polyester anti-pill fleece
• SHELL: storm flap with hidden snaps at top and bottom
• Inside placket; roll-away hood; adjustable cuffs with tabs
• Lower concealed pocket with zippers and reflective toggles
• Audio port access through inside left pocket
• Thermal retention shockcord at hood and drop back hem
• Reflective piping at shoulder yoke and upper back panels
• LINER: inside placket
• Center front reversible zipper
• Lower concealed pockets with autolock zippers
• Audio port access through inside left pocket

• 4 oz./yd_/140 gsm (US), 6.7 oz./L yd (CA), 100% polyester ripstop
• Fine mesh polyester lining at hood and body
• Fully seam-sealed waterproof shell
• 2,000 mm waterproofness, 2,000 g breathability
• Roll-away adjustable hood
• Adjustable shockcord at hood and drop back hem
• Storm flap with snap closure at bottom, chin guard
• Reflective piping at shoulder yoke and center back yoke
• Elasticized cuffs, underarm and back vent system for added breathability
• Center front auto-lock zipper with reflective toggle
• Lower front concealed zippered pockets with reflective toggle

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Classic fit
• Unlined hood
• No lining
• Self-neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

• 3.39 oz./yd_/115 gsm (US), 5.7 oz./L yd (CA), 100% polyester taslan
• Water-resistant finish
  
• Polyester fleece body, polyester taffeta in sleeve and hood
• 1.7oz. thermal polyfill insulation in sleeves
• Rollaway hood
• Storm flap with hidden snaps with partial inside placket and chainguard
• Thermal retention shockcord at hood and hem
• Elasticized cuffs
• Center front coil zipper with auto-lock slider and reflective rubble toggle
• Lower concealed pockets with zippers

• 2.1 oz./yd_, 100% nylon taffeta
• Water resistant
• Hood with drawcord
• Elastic cuffs
• Folds up into its own zippered front pocket
• Set in sleeves
• Open bottom

• 3.39 oz./yd_/115 gsm (US), 5.7 oz./L yd (CA), 100% polyester taslan
• Polyester fleece lining in body; polyester taffeta lining in sleeve and hood
• Water-resistant finish
  
• Rollaway hood
• Thermal retention shockcord at hood & hem
• Storm flap with hidden snaps with partial inside placket & chin guard
• Reflective piping at front and back yoke
• Elasticized cuffs
• Center front coil zipper with auto-lock slider & reflective rubber toggle
• Lower concealed pockets with zippers
• Audio port

• 4.6 oz./yd_ (US), 7.7 oz./L yd (CA), 155 gsm, 100% polyester pongee
• Shell lining is 100% taffeta with embossed print
• Fully seam-sealed waterproof shell
• Brushed tricot chin guard and pockets
• Storm flap with metal snap closure
• Thermal brushed tricot-lined collar
• Thermal retention shock cord at hood and hem

• Linner jacket is 7.5 oz./yd_., 255 gsm, 96/4 polyester/spandex bonded with 100% polyester fleece
• Linner jacket lining is 100% polyester tricot in sleeves
• Bonded two-layer soft shell liner with water repellent finish
• Brushed tricot-lined pockets
• Zip-off hood with back adjustable tab

• UTK 2 temperature range: 34F to -3F / 1C to -19C

• 3.5 oz./yd_ (US), 5.8 oz./L yd (CA), 100% nylon taslan
• Contrast nylon dobby trim
• Polyester mesh lining in body, taffeta in sleeves
• Inner jacket:: 9 oz./yd_, 100% polyester fleece
• Polyester taffeta lining;
• UTK 3 temperature range:; 30F to -9F / -1C to -23C
• Zip-off or roll-away hood
• Inside placket
• Thermal retention shockcord at hood, waist and hem
• Zip-off or roll-away hood
• Matching nylon taslan pocket welts and waistband
• Storm flap with security zippered pocket

• 4.4 oz./yd_/150 gsm (US), 7.3 oz./L yd (CA), 100% polyester twill
• Shell lining is 100% polyester taffeta with embossed print
• Linner jacket is 100% polyester jersey
• Inside storm placket with brushed tricot chin guard and collar
• Centre front and lower pockets with reverse coil zippers
• Zip-off hood with back adjustable tab
• Adjustable cuffs with tabs
• Chest pocket with invisible zipper
• Brushed tricot-lined pockets
• Thermal retention shock cord at hood and drop back hem
• Contrast stitching along flat reflective piping; audio port access through inside chest pocket
• Flat reflective piping at front, back and sleeves
• Audio port access through inside chest pocket
• Inside placket with brushed tricot-lined collar and pockets

• 3.4 oz./yd_/115 gsm (US), 5.7 oz./L yd (CA), 100% Polyester microfiber twill
• Polyester brushed tricot insulation 2.95 oz. in body and 1.77 oz. in sleeves
• Roll-away hood
• Thermal retention shockcord at hood and drop back hem
• Brushed tricot-lined collar and chin guard
• Elasticized cuffs
• Centre front auto-lock zipper with reflective toggle
• Storm flap with snap closure at bottom
• Lower brushed tricot-lined concealed zippered pockets
• Audio port access through inside left pocket