embroidered performance outerwear nylon water resistant

• 2.1 oz./yd_, 100% nylon taffeta
• 100% polyester brushed tricot lining
• Water resistant
• Snap front
• Raglan sleeves
• Reinforced front slash pockets
• Elastic cuffs
• Separate layers sewn at seams
• Open bottom
• Tear away label

• 3.04 oz./yd_, 100% nylon satin outer shell
• 100% polyester brushed tricot lining
• Water resistant
• Snap front
• Raglan sleeves
• Striped ribbed knit collar, cuffs and bottom band
• Reinforced slash front pockets
• Machine washable
• Woven label
• Individually polybagged 

• 7.8 oz./yd_, 100% nylon taffeta outer shell
• 75/13/12 polyester/rayon/cotton grey heather fleece lined body, sleeves and hood
• Water resistant
• Hood with drawcord and sliders
• Set-in sleeves
• Inside storm flap
• Reinforced slash front zippered pockets
• Elastic cuffs and bottom band
• Woven label
  

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 550 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Front side-entry zippered pockets
• Interior pockets
• Elastic windproof cuffs
• Folds and stows into separate pouch

• 2.8 oz./yd_ (US), 4.7 oz./L yd (CA), 100% polyester micro poplin
• Wind- and water-resistant
• Half-zip hood with adjustable bungie cord
• Dyed-to-match coil zipper
• Encased elastic cuffs
• Adjustable waist drawcord
• Front entry hidden pouch pocket
• Packs into mesh lined pouch pocket
• Champion "C" patch on left sleeve

• Proud member of the U.S. Cotton Trust Protocol.
• Made with OEKO-TEX certified low-impact dyes.
• We reduce plastic waste by the removal of polybags from all products except color White

This product meets the following Sustainable Style subcategories:

Socially Conscious Manufacturing: This product was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

• 3 oz./yd_ polyester fill, 100% 380T coated nylon shell
• 100% nylon lining
• Wind- and water-resistant
• Diamond quilted design
• Ribbed-knit collar, cuffs and waistband
• Nylon zipper with metal zipper pull
• Open welt pockets
• Folds and stows into separate pouch

• 100% nylon 33D with waterproof coating
• Nylon outer shell: level 3 waterproof coating
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000
• Classic fit
• No lining
• Self-neck tape
• Antique brass eyelets
• Antique brass 6 snap front closure (Black/ Black has black buttons)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at bottom opening
• Tear away label

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 650 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Elastic windproof armholes
• Front pockets with side entry
• Folds and stows into separate pouch

• 100% nylon exterior shell
• 100% polyester lining, 60 gm hyper-loft poly fill insulation
• Wind- and water-resistant
• #5 reverse coil zippers at chest and pockets
• Packable into chest pocket with reverse coil zipper
• Capped elastic armhole binding
• Locker loop at wearer's back neck
• Plastic cinche toggle at wearer's right side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 100% nylon exterior shell
• 100% polyester lining, 60 gm hyper-loft poly fill insulation
• Wind- and water-resistant
• #5 reverse coil zippers at chest and pockets
• Packable pocket with #3 reverse coil zipper
• Capped elastic sleeve cuffs
• Locker loop at wearer's back neck
• Plastic cinche toggle at wearer's right side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Classic fit
• Unlined hood
• No lining
• Self-neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

• 2.1 oz./yd_, 100% nylon taffeta
• Water resistant
• Hood with drawcord
• Elastic cuffs
• Folds up into its own zippered front pocket
• Set in sleeves
• Open bottom

• 100% nylon exterior shell
• 100% polyester lining, 60 gm hyper-loft poly fill insulation
• Wind- and water-resistant
• #5 reverse coil zippers at chest and pockets
• Packable pocket with #3 reverse coil zipper
• Capped elastic sleeve cuffs
• Locker loop at wearer's back neck
• Plastic cinched toggle at wearer's right-side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 100% nylon exterior shell
• 100% polyester lining, 60 gm hyper-loft poly fill insulation
• Wind- and water-resistant
• #5 reverse coil zippers at chest and pockets
• Packable pocket with #3 reverse coil zipper
• Capped elastic sleeve cuffs
• Locker loop at wearer's back neck
• Plastic cinched toggle at wearer's right-side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 100% 380T high density nylon
• 90/10 duck down/feather filling
• 550 fill-power
• Wind- and water-resistant
• Front pockets with side entry
• Interior pockets
• Folds and stows into separate pouch
• Open cuffs

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 650 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Elastic windproof armholes
• Front pockets with side entry
• Folds and stows into separate pouch