Page 6: Custom embroidered performance outerwear

• 7 oz./yd_/235 gsm (US), 11.7 oz./L yd (CA), 100% polyester sweater fleece
• Anti-static, anti-pill
• ChromaSoft technology combines the colorfastness of cationic dyes with soft cotton-feel performance
• Raglan sleeves
• Self-fabric trim at cuffs
• Sleeve pocket with dyed-to-match coil zipper
• Center front coil zipper with semi-auto lock slider and rubber pull
• Reflective piping detail at center front zipper
• Tear away label

• 4.3-ounce 100% polyester
• Cadet collar
• Dyed-to-match zipper
• Set-in sleeves
• Open cuffs and hem

• Liner Jacket Lining: 100% polyester taffeta
• Shell: 3.5 oz./yd_ (US), 5.8 oz./L yd (CA), 100% nylon 228T taslan
• Lining:100% polyester mesh in upper body
• UTK 3 temperature range, 30F to -9F / -1C to -23C
• Storm flap with security zippered pocket
• Inside placket
• Thermal retention shockcord at waist, hem and hood
• Zip-off hood
• reflective piping along yoke
• adjustable cuffs with tabs
• EZEM system

• 4 oz./yd_/135 gsm (US), 6.7 oz./L yd (CA), 100% polyester stretch jersey
• Three-layer
• 6,000 mm bonded waterproof membrane
• Polyester taffeta lining
• 20g polyester UTK SubDown fill
• Active fit
• Water-resistant
• Wind smart technology
• Laminated stretch shell with welded puffer channeling
• Dyed-to-match stretch binding
• Center front coil zipper with contrast teeth, auto lock slider and rubber toggle
• Right-chest and lower front zippered pocket with contrast teeth and rubber toggle
• Audio port access through inside left pocket
• UTK Hydropel

• Body: 6 oz./yd_/200 gsm (US), 10 oz./ L yd (CA), 3-Layer 100% polyester interlock bonded to polyester birdseye with inner membrane
• Contrast: 1 oz. polyester shell with polyester Lining in front & back hybrid panels
• Insulation: 2.3 oz. poly fill in front & back hybrid panels
• 8,000 mm waterproof rating
• 1,000 g breathability rating
• Center front reverse coil zipper, with rubber toggle
• Zippered pockets at lower front, and left sleeve
• Reflective piping details
• Tear away main label

• 8.9 oz/yd_., 100% polyester bonded sherpa
• 82/18 nylon/elastane stretch nylon
• Debossed Spyder neck tape
• Elastic cuff and hem binding
• Full-zip front closure
• Vertical-zippered chest pocket with stylized Spyder grommet
• Inseam pockets with rubber Spyder zip closure
• Internal draft flap
• Stylized front and back yoke seams
• Internal locker loop
• High-definition rubberized Spyder wordmark
• Raised silicone Spyder Bug patch

• 1 oz./yd_ (US), 1.7 oz./L yd (CA), 100% recycled nylon
• Lining: 100% polyester taffeta
• Insulation: 5.6 oz./yd_, 100% polyester UTK SubDown fill
• Water-repellent, water-resistant
• Shock cord at hood
• Center front placket with metal snap closure
• Dyed-to-match jersey binding at shoulders, sleeves, cuffs and bottom hem
• Self-fabric cuffs with adjustable metal snap closure
• Lower zippered pockets
• Packable style; folds into zippered pouch pocket 

• 7.8 oz./yd_, 100% nylon taffeta outer shell
• 75/13/12 polyester/rayon/cotton grey heather fleece lined body, sleeves and hood
• Water resistant
• Hood with drawcord and sliders
• Set-in sleeves
• Inside storm flap
• Reinforced slash front zippered pockets
• Elastic cuffs and bottom band
• Woven label
  

• Body: 1 oz./yd_/39 gsm (US), 1.7 oz./L yd (CA), 100% polyester
• Polyester lining
• 2.3 oz. poly fill insulation
• Water-resistant finish
• Stretch binding at sleeve and hem
• Center front reverse coil zipper
• Lower zippered pockets
• Packable style into separate storage pouch

• Body: 5 oz./yd_ (US), 8.4 oz./L yd (CA), 50/41/9 polyester/cotton/nylon peached poplin
• 100% polyester quilted taffeta lining
• 3.5 oz/yd_ thermal poly fill insulation 
• Water-resistant
• Self-fabric cuffs with snaps
• Center front vislon zipper with auto-lock slider and snap closures
• Lower pockets with hidden snaps closures

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 550 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Front side-entry zippered pockets
• Interior pockets
• Elastic windproof cuffs
• Folds and stows into separate pouch

• 2.9 oz./yd_ (US) 4,83 oz./L yd (CA),100% polyester fabric with interior water-resistant coating
• 100% polyester 1x1 ribbing
• Waterproof pressure resistance: 600 mm
• Single layer, no lining 
• Matte plastic #5 zipper
• Self-neck tape
• Welt pockets
• Locker loop in center back
• Tear away label

• 10.3 oz./yd_., 100% polyester knit jacquard
• 8.3 oz./yd_., 95/5 polyester/spandex power stretch
• Debossed Spyder neck tape
• Stylized front and back seams
• Vertical-zippered chest pocket with stylized Spyder grommet
• On seam hand pockets with concealed locking pull
• Internal draft flap
• Internal locker loop
• High-definition rubberized Spyder wordmark on left seam
• High-definition Spyder 'Bug' logo on back yoke

• 2.8 oz./yd_ (US), 4.7 oz./L yd (CA), 100% polyester micro poplin
• Wind- and water-resistant
• Half-zip hood with adjustable bungie cord
• Dyed-to-match coil zipper
• Encased elastic cuffs
• Adjustable waist drawcord
• Front entry hidden pouch pocket
• Packs into mesh lined pouch pocket
• Champion "C" patch on left sleeve

• Proud member of the U.S. Cotton Trust Protocol.
• Made with OEKO-TEX certified low-impact dyes.
• We reduce plastic waste by the removal of polybags from all products except color White

This product meets the following Sustainable Style subcategories:

Socially Conscious Manufacturing: This product was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

• 3.1 oz./yd_ (US), 5.2 oz./L yd (CA), 100% nylon oxford with water-resistant finish
• Trim: 100% polyester dobby
• Lining: 100% polyester taffeta
• Inner Jacket: 8.1 oz/yd_, 100% polyester anti-pill spun fleece
• UTK 2 temperature range:; 34F to -3F / 1C to -20C
• Snap-off hood
• Storm flap
• Thermal retention shockcord at hood and hem
• Adjustable cuffs with tabs
• Front yoke with piping

• 3 oz./yd_ polyester fill, 100% 380T coated nylon shell
• 100% nylon lining
• Wind- and water-resistant
• Diamond quilted design
• Ribbed-knit collar, cuffs and waistband
• Nylon zipper with metal zipper pull
• Open welt pockets
• Folds and stows into separate pouch

• 100% 380T coated nylon shell
• Polyester fill
• Classic fit
• Water- and wind-resistant
• Binding trim at cuffs and hem
• Exposed nylon zipper with pull tab at center front and collar
• Zippered welt pockets
• Folds and stows into separate neck pillow stored in collar

• 100% nylon 33D with waterproof coating
• Nylon outer shell: level 3 waterproof coating
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000
• Classic fit
• No lining
• Self-neck tape
• Antique brass eyelets
• Antique brass 6 snap front closure (Black/ Black has black buttons)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at bottom opening
• Tear away label