Page 2: Custom embroidered safety outerwear

• 100% polyester woven shell with durable water-repellent (DWR) finish bonded to a water-resistant breathable film insert and a 100% polyester microfleece lining
• Black bottom front and lower sleeves for a cleaner appearance
• Fabric waterproof rating: 5000MM
• Fabric breathability rating: 5000G/M2
• Full-length interior storm flap with chin guard
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves; tape is bonded to fabric
• Molded right chest hand and center front zippers with rubber pulls
• Mic clips at shoulders
• Elastic cuffs with adjustable hook and loop closures and rubber tabs
• Adjustable drawcord hem

• 3 oz./yd, PVC/Modacrylic Knit, Water-Repellent
• Non-conductive durable hardware
• 1 1/2" reflective striping
• Two patch pockets with flaps
• Vented back with "D" ring access
• Take-up tabs on cuff
• Hand or machine wash gentle cycle. Use mild soap. Line Dry

• Solid polyester front with mesh back
• Heavy duty black bottom to help keep a clean appearance
• Zipper front closure reinforced with durable webbing
• 2 wide high-performance reflective material with 2.5 contrasting black panels
• Reinforced left and right mic tabs
• Padded neck for extra comfort
• 2 lapel grommets
• 7 anchor points certified to tether 25lbs each with a maximum tether length of 54
• D-ring access and side slits for ease of movement.
• Black reflective trim
• Large left chest gusseted pocket with dual-function flap that can be held open by hook & loop
• Retractable clear ID holder and an anchor point.
• Right chest 2-division pocket with D-rings
• Lower full length multi-function pockets that can be held open by hook-and-loop including reinforced anchor points for tool tethers
• Hidden back pouch pocket with left and right zipper access
• Internal double layer pockets with load bearing straps

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 2

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 100% poly shell with inner knit collar
• 600MM fabric waterproof rating
• Articulated shaping for ease of movement
• Reflective OGIO heat transfer label for tag-free comfort
• Zip-through cadet collar
• Reflective O heat transfer at back neck
• Reflective stacked O heat transfers at center back and sleeves
• Mesh vents at shoulders with contrast bar tacks
• Reflective O pattern at black side panels and under arms
• Side-back zippered pocket for valuables
• Raglan sleeves with shaped cuffs and inside cuff elastic for comfort
• Slight drop tail hem with drawcord and toggle for adjustability

• Ultra-Cool 100% polyester mesh material
• Brilliant Trim reflective edging improves low light visibility
• Hook-and-loop front closure reinforced with durable webbing
• 5-point breakaway on shoulders, sides, and front closure
• 2" wide high performance reflective material on 3" contrasting color
• Left and right chest mic tabs
• Two lapel grommets
• Outside right chest 2-tier, 4-division pocket
• Outside left chest multi-use cell pocket
• Inside lower patch pockets
• Two lower outside cargo pockets with adjustable flaps and grommets

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Shell: EXCEL FR Flame-resistant, 9 oz./yd, Twill 100% Cotton, Water-Repellent
• Lining: 100% Cotton
• Insulation Package: 12 oz./yd,100% Modacrylic
• Separating, heavy-duty, Nomex taped brass zipper
• Rib-knit collar, cuff and waistband
• Two large inset, welted-slash pockets
• Left sleeve pocket
• Industrial Laundry - Heavy Soil, Industrial Laundry - Light Soil, Home Wash

Regular sizes available in style JET2

• 4.6-ounce 100% poly microfleece upper body lining
• 3-ounce quilted polyfill lower body lining
• 2-ounce quilted polyfill hood and sleeve lining
• Black bottom front and lower sleeves for a cleaner appearance
• Fabric waterproof rating: 5000MM
• Fully seam-sealed
• Adjustable rain hood
• Durable reflective 2-inch tape meets ANSI 107 requirements
• Full-length exterior storm flap
• Left chest pocket
• Right chest pocket
• Two lower front pockets
• Center front zippered pocket to hold a tablet
• Mic clips at shoulders
• Elastic cuffs
• Elastic hem
• Decoration access pocket

• 100% polyester
• 4 layer filtration system provides basic protection against non-toxic dust, smoke and other non-toxic particles found on the job site
• Concealed reflective piping along hood, front and back chest seams for better low light visibility
• Thumbhole on cuffs
  
• Durable lightweight lime water-resistant ripstop shell with lining
• Adjustable hood
• 2 wide high-performance reflective tape
• Durable black water-resistant ripstop in high-wear areas, along the sides and under the arms
• Tall collar design with asymmetrical zipper to avoid chaffing
• Left chest pocket with a zipper closure
• Lower slash pockets with a zipper closure

• Shell: Flame-resistant, 7 oz./yd (235 g/m),  48% Modacrylic/ 37% Lyocell/ 15% Aramid, Water-repellent
• Lining: 100% Cotton
• Insulation Package: 12 oz./yd (405 g/m), 100% Modacrylic
• 360 visibility with front and back 2" silver reflective striping
• DWR Durable Water Repellent finish
• Separating, Nomex taped zipper
• Rib knit collar
• Two large inset slash welted pockets, Napoleon chest pocket with zipper closure
• One inside chest pocket
• Lanyard access back
• Mic loop for gas monitor
• Home Wash

• Polyester
• Durable waterproof seam sealed shell with thermal insulation
• 2 wide reflective material with 3 contrasting panels
• Detachable hood
• Black bottom front & sleeves
• Lower slash pockets angled
• Left chest radio pocket with flap and D-ring

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 100% polyester lining
• Black bottom front and lower sleeves for a cleaner appearance
• Shell's fabric waterproof rating: 5000MM
• Fully seam-sealed shell
• Adjustable rain hood
• Durable reflective 2-inch tape meets ANSI 107 requirements
• Full-length interior and exterior storm flaps
• Vented cape back
• Right chest pocket and retractable ID holder
• Two lower front pockets
• Center front zippered pocket to hold a tablet
• Gusseted cuffs
• Elastic hem
• Decoration access pocket in shell
• Non-ANSI 8.6-ounce 100% polyester inner full-zip hoodie
• Hoodie can be attached inside shell

• Modacrylic blend Flame Resistant solid material
• FR hook-and-loop front closure
• 2 wide laminated reflective material
• Two lower inside patch pockets
• One inside left chest 2-tier, 4-division pencil pocket
• Made in USA

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 6.2 oz., modacrylic flame-resistant mesh material
• 2" wide breathable reflective material
• FR hook-and-loop front closure
• Two lower inside patch pockets
• Left chest inside two-tier, four-division pocket

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 2 wide ORALITE prismatic tape performs exceptionally well under wet conditions and provides additional durability compared to silver glass beaded reflective material
• Reflective piping accents add better visibility in low light
• Durable ripstop material with waterproof seam sealed construction
• Tall collar designed with asymmetrical zipper to avoid chafing
• 6 side zipper for added comfort when sitting and provides improved airflow
• Thermal insulation
• Adjustable cuffs
• Black lower body and sleeves help the wearer keep a clean appearance
• Storm cuff (powder barrier) waist liner keeps wind and snow out of critical areas
• Two outside lower inset pockets with zippers
• Hidden left chest pocket
• Left forearm zipper pocket with microfiber wipe for cleaning safety glasses
• Inside lower left hidden tablet (iPad) pocket with zipper

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

"CLICK HERE to watch product video"

• 100% polyester
• Lower 3-way pockets
• Chest pockets
• Water resistant retractable clear ID
• Side water bottle pockets with adjustable bungee cord
• Black reflective binding
• Padded collar
• Back pouch pocket with left and right zipper access
• American flag patch that is attached with hook-and-loop (2"H x 4"W)
• Orange Contrast panels
• Magnet closures used throughout all over the vest

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 2

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 100% polyester mesh for breathability
• 100% polyester tricot exterior pockets for durability and easy decoration
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
• Two-tone contrast polyester tricot fabric under reflective tape; contrast binding
• Left chest bellows pocket with flap and hook and loop closure
• Two layered right chest pockets: one open one divided
• Two lower front flap pockets with hook and loop closures
• Interior open lower mesh pockets on both sides
• Mic clip at left chest for easy access
• Molded center front zippered closure

• Ultra-Cool 100% polyester mesh
• 4-season adjustability for accurate sizing in any weather even over bulky coats
• 5-point breakaway
• Hook-and-loop front closure
• Two 1" wide high performance reflective material with 4.5" contrasting color
• Left chest mic tab
• Inside right chest 2-tier pencil/cell pocket
• Two inside lower patch pocket
• Outside left chest 2-tier pencil pocket

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 2

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.