Custom embroidered camo performance

• 10 oz./yd_ (US), 16.3 oz./L yd (CA), 90/10 polyester/spandex 2-layer softshell bonded to 100% polyester brushed tricot interior
• Storm Shield level 2 for steady rain
• Wind- and water-resistant
• Auto lock zipper with easy grab pull
• Adjustable hook-and-loop elasticized cuffs
• Auto-lock zipper with easy-grab pull
• Exterior chest pocket with zipper closure and interior media port
• Interior cell phone pocket with hook-and-loop closure
• Exterior hand pockets with zipper closure
• Droptail hem

• 2.5 oz./yd_ (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 3.5 oz./yd_, 100% polyester moisture-management/antimicrobial performance fabric
• Badger Sport paneled shoulder for maximum movement
• Double-needle hem
• Self-fabric collar and cuffs
• Badger heat-seal logo on left sleeve

• 7 oz./yd_, 100% polyester moisture-management fleece fabric
• Badger Sport paneled shoulder for maximum movement
• Side and underarm textured waffle weave panels
• Poly rib cuff and waist
• Pouch pocket with hook-and-loop closures for headset opening
• Embroidered badger logo on left sleeve

• 100% cotton, washed chino twill
• Relaxed fit
• Unstructured, six-panel, low-profile
• Curved bill
• NO Sweat moisture-managment sweatband
• Embroidered removable flag patch (3" x 1 3/4")
• No top button
• Hook-and-loop closure

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

• 4.2 oz./yd_, 100% polyester
• Modern fit
• Two piece self collar construction
• Back modern yoke
• Hemmed bottom

• 100% nylon 33D with waterproof coating
• Nylon outer shell: level 3 waterproof coating
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000
• Classic fit
• No lining
• Self-neck tape
• Antique brass eyelets
• Antique brass 6 snap front closure (Black/ Black has black buttons)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at bottom opening
• Tear away label

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Classic fit
• Unlined hood
• No lining
• Self-neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

• 10 oz./yd_, 80/20 polyester/cotton water-resistant fleece body
• Gunmetal Heather is 100% polyester
• 100% polyester pique contrast panels
• 100% anti-pill polyester face 
• Classic fit
• Removable zip off hood with interior cadet collar
• 1x1 ribbing at cuffs and waistband
• Antique nickel eyelets with antique nickel tipped flat drawcord
• Coil exposed zipper
• Thumbholes at cuffs
• Media pocket & eyelet in front welt pocket
• Tear away label

• 100% polyester, sublimation printed fabric
• Classic fit
• Structured, five-panel, mid-profile with rope
• Stand-up mesh stay
• Flat bill, green undervisor
• Performance moisture-management sweatband
• Leather strap, Imperial flip buckle and grommets

• 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• Matte finish #4 reverse coil zipper
• Single layer body with fine mesh hood liner
• Three panel hood & scuba neck
• Welt pockets with mesh pocket bags
• Elastic cuffs and waistband
• Self-neck tape with locker loop in center back
• Tear away label

• 5.3 oz./yd_, 100% heavyweight cotton
• Pre-shrunk
• Classic fit
• Ribbed collar
• Shoulder-to-shoulder taping
• Double-needle sleeves and bottom hem
• Sewn in label

No two shirts are exactly alike. Enjoy each for its own uniqueness. Wash separately.

Additional colors under style CD1000Y