hooded performance fashion gray

• 8.5 oz./yd, 88/12 polyester/spandex
• Breathable PrimoLite mesh
• Moisture-management properties
• UPF 30+ protection
• Precise active fit
• Low profile ANETIK logo on right shoulder
• Zippered pocket on back right side
• Screen printed label 

• 2.5 oz./yd (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 6.3 oz./yd, 89/11 recycled polyester/spandex
• Moisture-management properties
• 3-panel hood with drawcord
• Side seam pockets
• Set-in sleeves
• Self-fabric bottom hem
• Tagless label

Responsible Materials: Contains 89% recycled polyester.

• 6.3 oz./yd, 89/11 recycled polyester/spandex
• Moisture-management properties
• 3-panel hood with drawcord
• Side seam pockets
• Set-in sleeves
• Self-fabric cuffs and bottom hem
• Tagless label

Responsible Materials: Contains 89% recycled polyester.

• 100% polyester
• Omni-Shade UPF 50 sun-blocking protection
• Omni-Wick keeps you dry and cool
• Relaxed fit
• Raglan sleeves
• Columbia PFG branding on left sleeve
• Heat-sealed label

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Classic fit
• Unlined hood
• No lining
• Self-neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

• 7.1 oz./yd, 82/18 recycled polyester/elastane brushed single jersey
• Regular fit
• Moisture-management properties
• Hydrophilic finish
• Curved hem
• Contrast heat-transfer logo on right hip

Responsible Materials: contains 82% recycled polyester

Responsible Manufacturing: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified, and the company that makes this product is Fair Labor Accredited.

• 13.8 oz./yd, (300 gm) 100% waterproof polyester shell bonded to 160gm micro fleece lining
• Waterproof coating: 20,000 mm
• Inner PU coating: breathability/permeability = 5,000
• 3 panel scuba hood
• #5 water-resistant zippers
• Toggles at hood and bottom side seams
• Antique nickel eyelets
• Zippered left chest pocket and welt pockets (Concealed embroidery access for embellishing)
• Media pocket
• Tear away label

• 10 oz./yd, 80/20 polyester/cotton water-resistant fleece body
• Gunmetal Heather is 100% polyester
• 100% polyester pique contrast panels
• 100% anti-pill polyester face 
• Classic fit
• Removable zip off hood with interior cadet collar
• 1x1 ribbing at cuffs and waistband
• Antique nickel eyelets with antique nickel tipped flat drawcord
• Coil exposed zipper
• Thumbhole on cuffs
• Media pocket & eyelet in front welt pocket
• Tear away label

• 6.3 oz./yd, 89/11 recycled polyester/spandex
• Moisture wicking
• 3 panel hood
• Side seam pockets
• Set-in sleeves
• Self-fabric cuffs and bottom hem
• Tagless label

Responsible Materials: Contains 89% recycled polyester.

• 6.3 oz./yd, 89/11 recycled polyester/spandex
• Moisture-management properties
• 3-panel crossover hood
• Side seam pockets
• Set-in sleeves
• Self-fabric cuffs
• Thumbhole on cuffs
  
• Self-fabric bottom hem
• Side vents
• Tagless label

Responsible Materials: Contains 89% recycled polyester.

• 6.3 oz./yd, 89/11 recycled polyester/spandex
• Moisture wicking
• 3 panel hood
• Side seam pockets
• Set-in sleeves
• Self-fabric bottom hem
• Tagless label

Responsible Materials: Contains 89% recycled polyester.

• 6.7 oz./yd, 88/12 polyester/spandex
• Featherweight four-way stretch PrimoLite mesh for increased mobility
• Moisture-management properties
• UPF 30+ protection
• Precise active fit
• Superior breathability
• Low profile ANETIK logo on right shoulder
• Zippered pocket on back right side
• Thumbholes
• Screen printed label 

• 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• Matte finish #4 reverse coil zipper
• Single layer body with fine mesh hood liner
• Three panel hood & scuba neck
• Welt pockets with mesh pocket bags
• Elastic cuffs and waistband
• Self-neck tape with locker loop in center back
• Tear away label

• 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• Matte finish eyelets and zippers
• #4 zipper with zipper pull
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label