Page 4: Custom embroidered hooded performance

• 3.4 oz./yd/115 gsm (US), 5.7 oz./L yd (CA), Polyester microfiber twill
• 2.95oz. insulation in body and 1.7oz in sleeves
• Polyester brushed tricot lining in body
• Water resistant
• UTK 3 built for extreme cold conditions, recommended for temperatures between 30F to -7F (-1C to -22C)
• Roll-away hood
• Thermal retention shockcord at hood and drop back hem
• Elasticized cuffs
• Storm flap with snap closure at bottom
• Brushed tricot-lined collar and chin guard
• Centre front auto-lock zipper with reflective toggle
• Lower brushed tricot-lined concealed zippered pockets
• Audio port access through inside left pocket
• EZEM System designed for easy embroidery access
• Reflective piping at shoulder yoke and center back yoke

• 100% polyester shell
• 100% polyester jersey lining with mesh insets at gussets
• Three-panel hood with drawcord and toggle
• Raglan sleeves
• Front pouch pocket
• Articulated elbows for greater mobility
• Half elastic half self-fabric cuffs for comfort
• Left side seam zipper for easy on/off
• Drawcord hem with toggle

• Body: 6 oz./yd/200 gsm (US), 10 oz./ L yd (CA), 3-Layer 100% polyester interlock bonded to polyester birdseye with inner membrane
• Contrast: 1 oz. polyester shell with polyester Lining in front & back hybrid panels
• Insulation: 2.3 oz. poly fill in front & back hybrid panels
• 8,000 mm waterproof rating
• Fabric breathability properties allow for heat and moisture transfer for cool and dry comfort. 1,000 g breathability rating
• Windsmart technology fabrication, made with barrier for windy conditions
• UTK 1 ideal for mild to cool temperatures ranging from 43F to 12F (6C to -10C)
• Center front reverse coil zipper, with rubber toggle
• Zippered pockets at lower front, and left sleeve
• Reflective piping details
• Tear away main label

• 4-ounce 100% polyester interlock with PosiCharge technology
• UPF rating of 50
• Tear-away label

• 6.5-ounce 100% polyester with moisture-wicking
• Tag-free label
• Realtree EDGE print
• Hood with metal grommets and tips on dyed-to-match round cords
• Front pouch pocket

• 6.8-ounce 90/10 polyester/spandex
• Moisture-wicking
• Three-piece hood
• Zipper garage
• Back neck tape
• Forward shoulder seams
• Front and back yokes

• 12-ounce 60/40 cotton/poly
• 5.3-ounce 100% polyester thermal lining for extra warmth
• Interior cellphone pocket
• Rib knit cuffs and waistband
• Brass zipper
• Drawcord with brass eyelets
• Front hand warmer pockets

• 100% poly twill; 3.9 oz./yd/132 gsm (US), 6.5 oz./L yd (CA),
• Polyester taffeta lining
• 7.7 oz Polyester lining jacket with anti-pill fleece
• Water resistant and cire finish
• UTK 3 built for extreme cold conditions, recommended for temperatures between 30F to -7F (-1C to -22C)
  
• Roll-away hood
• Thermal retention shockcord at hood and drop back hem
• Adjustable cuffs with tabs
• Storm flap with hidden snaps at top and bottom
• Placket at liner
• Center front reversible zipper
• Lower concealed pocket with zippers and reflective toggles
• Lower concealed pockets with auto-lock zippers
• Reflective piping at shoulder yoke and upper back panels
• Audio port access through inside left pocket
• EZEM System designed for easy embroidery access
  

• 5.5-ounce 100% polyester
• Three-panel hood
• Self-fabric hood lining
• Taped neck
• Dyed-to-match drawcords with metal tips
• Raglan sleeves
• 2x2 rib knit cuffs with yarn dye stripe
• Front pouch pockets
• Self-fabric hem

• 5.9-ounce 100% polyester yarn-dyed fleece with PosiCharge technology
• Taped neck
• Three-panel hood with solid lining
• Raglan sleeves
• Front pouch pocket
• Self-fabric cuffs and hem

• 3.9 oz./yd/132 gsm (US), 6.5 oz./L yd (CA)
• Shell: 100% polyester twill, with water resistant and cire finish
• Shell Lining; Polyester taffeta
• Liner Jacket: 7.7 oz Polyester anti-pill fleece
• UTK 3 built for extreme cold conditions, recommended for temperatures between 30F to -7F (-1C to -22C)
  
• Storm flap with hidden snaps at top and bottom
• Inside placket; roll-away hood; adjustable cuffs with tabs
• Lower concealed pocket with zippers and reflective toggles
• Audio port access through inside left pocket
• Thermal retention shockcord at hood and drop back hem
• Reflective piping at shoulder yoke and upper back panels
• Inside placket on liner
• Center-front reversible zipper
• Lower concealed pockets with autolock zippers
• Audio port access through inside left pocket
• EZEM System designed for easy embroidery access
  

• 3.39 oz./yd/115 gsm (US), 5.7 oz./L yd (CA), 100% polyester taslan
• Polyester fleece lining in body; polyester taffeta lining in sleeve and hood
• Thermal polyfill insulation in sleeves
• Water resistant
• UTK 1 ideal for mild to cool temperatures ranging from 36F to 0F (2C to -18C)
• Rollaway hood
• Thermal retention shockcord at hood & hem
• Storm flap with hidden snaps with partial inside placket & chin guard
• Reflective piping at front and back yoke
• Elasticized cuffs
• Center front coil zipper with auto-lock slider & reflective rubber toggle
• Lower concealed pockets with zippers
• Audio port
• EZEM System designed for easy embroidery access
  

• 6.5-ounce 100% polyester with moisture-wicking
• Tag-free label
• Realtree EDGE print
• Hood with metal grommets and tips on dyed-to-match round cords
• Reverse coil zipper
• Front pockets

• Garment-dyed for a lived-in feel
• Jersey-lined hood
• Natural-colored flat drawcord (White flat drawcord on White)
• 1x1 rib knit cuffs and waistband
• Signature twill label and back neck tape
• Rolled forward shoulder
• Relaxed fit seamless body

• 6.5 oz./yd, 100% recycled polyester
• Regular fit
• CLIMACOOL moisture-management technology
• CLIMAWARM insulating materials trap warmth
• Hood
• adidas heat-seal logo on left chest
• Woven label

Responsible Manufacturing: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified, and the company that makes this product is Fair Labor Accredited.

• 6.8-ounce 80/20 recycled nylon/recycled spandex knit interlock
• 90/10 recycled nylon/spandex woven overlays
• UPF rating of 50+
• Stretch
• Hood with dyed-to-match drawcords
• Zippered hand pockets
• Adjustable drop tail hem
• Black MiiR logo recycled zinc soft-touch zipper pulls
• Vertical silicone MiiR logo heat transfer at right pocket above hem

• 5.8-ounce 100% polyester with PosiCharge technology
• Tear-away removable label
• Three-panel hood
• Self-fabric cuffs and hem

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

• 8.5 oz./yd, (280gm) 60/35/5 cotton/polyester/spandex
• Four-way stretch French Terry fabric for increased mobility
  
• Standard fit
• 100% ring-spun cotton face yarns for printability
• Pre-laundered fabric to reduce shrinking
• Sewn eyelets
• Flat drawcord with capped tip
• Double layer 3-panel hood
• 320gm 1x1 ribbing at cuff and waistband
• Hidden welt pockets
• Tear away label

• 7.4 oz./yd, 100% polyester wicking double knit mesh texture
• Dry Excel moisture management properties
• Pinhole mesh lined hood
• Drawcord
• High collar
• Front zippered pocket
• Pouch pocket
• Raglan sleeves
• Half-elastic cuffs
• Woven label