Page 11: Custom embroidered pocket

• 9 oz./yd (US), 15 oz./L yd (CA), 96/4 polyester/spandex bonded with brushed tricot with inner membrane
• Three-layer bonded fabric construction with inner waterproof membrane, combines breathability with superior weather protection
• Team fit
• 3,000 mm waterproof rating
• Fabric breathability properties allow for heat and moisture transfer for cool and dry comfort. 1,000 g breathability rating
• Windsmart technology fabrication, made with barrier for windy conditions
• UTK 1 ideal for mild to cool temperatures ranging from 45F to 14F (7C to -10C)
• Matching chin guard
• Center front reverse coil zipper
• Lower zippered pockets

• 8.5 oz./yd (280gm) 80/20 ring-spun cotton/polyester 3-end fleece, 32 singles
• Ash Heather is 70/30 cotton/polyester
• Oversized fit
• Double layer single piece hood
• No drawcords
• Drop shoulder
• #5 nickel kissing zipper
• Blind stitch sewing on all seams
• 1x1 ribbing at cuff and waistband
• Twill neck tape
• Tear away label

• 10 oz./yd, 100% polyester sweater knit bonded to fleece
• Custom Spyder knit jacquard
• Modern fit
• Brushed microfiber inner collar
• Stretch fleece panels at underarm and side body
• Branded Spyder zipper pull
• Concealed on-seam front pockets
• Iconic Spyder bug on left sleeve

• 12 oz./yd, super-duty 100% washed cotton duck
• Arctic-weight quilt lined taffeta
• Brass zipper with a hook and loop storm flap
• Two chest pockets with hook and loop closures
• Pleated elbows and action back
• Side vents with snap closure
• Hidden knit storm cuffs

• 8.9 oz./yd., 100% polyester nail head weave fabric
• 100% synthetic down insulation
• Modern fit
• Micro-brushed tricot inner collar piecing
• Concealed zipper inside chest for embroidery access
• Zippered hand warmer pockets

• Polyester/spandex
• Moisture-management and anti-odor finishing
• Black mesh paneling
• 2" wide high-performance stretch reflective tape
• Left chest pocket

Cooling fabric tested by Q-Max and has a 14% higher cooling rate than our current fabric.

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 6.95 oz./yd, 50/40/10 modacrylic/lyocel/twaron, modacrylic flame-resistant blend interlock knit material
• Lightweight
• 2 wide high performance breathable reflective material greatly reduces hot spots and provides greater flexibility over solid tapes
• Dark flame-resistant sides provide visual contrast
• Left chest pocket

• 9.5 oz./yd., 57/38/5 cotton/modal/spandex, 320gm fleece
• Generous boxy fit
• Double layer one piece hood
• Drop shoulder
• No drawcords
• Blind stitch sewing on all seams
• 400gm 1x1 ribbing
• Tear away label

• 3 oz./yd, 100% post-consumer recycled polyester ripstop
• Regular fit
• 2.5L NanoPro waterproof
• DWR treatment
• 100% seam-taped for complete leak proof protection
• Elastic waistband with internal drawcord
• Zippered hand and back pockets
• Side zippers and ankle snaps
• Folds up into back pocket
• DTF logo on right leg

• 82/18 nylon/elastane matte finish, recycled imitation down fill
• 100% polyester lining
• Strategically placed internal stretch panels for mobility
• Adjustable zip-off hood
• Collar with brushed tricot
• Debossed Spyder neck tape
  
• Forward-set shoulder seams
• Stretch storm cuffs with thumb holes
• Underarm ventilation system
• Exposed molded zipper
• Internal zippered chest pocket
• Two internal drop-in pockets, secure zip hand pockets
• Internal draft flap
• Adjustable, internal hem cinch-cord
• Internal locker loop
• High-definition Spyder wordmark
• Raised silicone Spyder Bug patch

• 12 oz./yd, 100% cotton flame resistant fleece
• Flame resistant brass front zipper
• Flame resistant rib knit cuffs
• Flame resistant brass front zipper
• Two-needle stitched main seams
• Two front patch pockets
• Relaxed fit
• Meets the requirements of ASTM F1506, NFPA 70E, NFPA2112, and OSHA 1910.269

• 9 oz./yd, 80/20 cotton/polyester fleece
• Classic fit
• 1x1 ribbed collar
• Side gussets
• Metal zipper
• Welt pockets
• 1x1 ribbed cuffs and bottom hem
• Tear away label

• Modacrylic blend Flame Resistant solid material
• FR hook-and-loop front closure
• 2 wide laminated reflective material
• Two lower inside patch pockets
• One inside left chest 2-tier, 4-division pencil pocket
• Made in USA

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Polyester/spandex
• Mesh back
• Black bottom on front (Contrast on shirt, a request from Dept. of Transportation)
• Left chest pocket
• Breathable tape stretches

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Flame-resistant, 12.5 oz./yd (425 g/m), 95% Cotton/ 5% Spandex Brushed Fleece
• Two ply hood with drawcord closure and 1/4 zip front
• Rib knit cuffs and waistband
• Raglan sleeves
• Two side seam pockets
• Home Wash

Regular sizes available under style SEH8

• 9.29 oz./yd, 55/40/5 cotton/polyester/spandex moisture-management BadgerBlend fabric
• Classic fit
• Contrasting 8" locking zipper with Badger "B" logo slider
• Slanted set-in front pocket with contrasting liner
• Badger Sport paneled shoulder for maximum movement
• Vented Hem
• Badger woven logo label on left pocket

• 9 oz./yd, 100% polyester fleece
• 5 oz./yd, 100% polyester mesh lining
• Double-lined three-piece hood
• Nylon front zipper
• 2" reflective tape
• Oversized front pockets
• Knit cuffs and waistband

• Polyester/spandex
• Mesh back
• Black bottom on front (Contrast on shirt, a request from Dept. of Transportation)
• Left chest pocket
• Breathable tape stretches

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.