Page 7: Custom embroidered long sleeve sweatshirts

• 8.5 oz./yd_, (280gm) 60/35/5 cotton/polyester/spandex
• Standard fit
• 4-way stretch French terry
• 100% ring-spun cotton face yarns for printability
• Pre-laundered fabric to reduce shrinking
• Cadet collar
• Reverse coil zipper
• 1-inch double needle waist hem with split sides
• Tear away label

• 8 oz./yd_, 80/20 ring-spin cotton/polyester
• Pre-shrunk
• Double-needle stitching at cuffs and waistband
• Tear away label

• 9.3 oz./yd_, 50/50 cotton/polyester
• Oxford is 48/52 cotton/polyester
• Made with sustainably sourced USA grown cotton
• Three-end fleece
• Dri-Power moisture-management properties
• 2-ply hood with grommets
• Matching drawcord
• Front pouch pocket
• Ribbed knit cuffs and waistband
• Eagle "R" logo flagtag at left bottom hem

• 8 oz./yd_, 50/50 cotton/polyester
• Double-needle stitching at waistband and cuffs
• Tear away label

• Flame-resistant, 12.5 oz./yd_, 95% Cotton/5% Spandex Brushed Fleece
• Pullover Crewneck
• Hemmed sleeve with elastic
• Elastic waist

Regular sizes available under style SEC2

• 7.5 oz./yd_ (US) 12.5 oz./L yd (CA), 55/45 ring-spun cotton/polyester fabric, 20 singles
• Unisex, slim fit
• Loopback terry fabric
• Antique silver zipper & zipper pull
• Antique silver eyelets
• Double shoelace drawcords with antique silver metal tips. Choose from dyed-to-match or natural - easily remove one or keep them both
• Single shoelace drawcord on Bone and White
• Twill neck tape
• 1x1 ribbing at cuffs & waistband
• Tear away label

• 13 oz./yd_, 56/34/10 modacrylic/lyocell/aramid
• 2-piece hood with drawcord
• Split-pouch pockets
• Ribbed cuffs to keep air out, and sleeves in place during movement

Certifications Level 1: NFPA 2112, NFPA 70E, ASTM F1506

Certifications Level 2: Category 2 Protection

Hazard: Flash Fire, Arc Flash

EBT Arc Rating: 9.9

Regular sizes available under style SMZ8

• 8.5 oz./yd_, (280gm) 60/35/5 cotton/polyester/spandex
• Standard fit
• 4-way stretch French terry
• 100% ring-spun cotton face yarns for printability
• Pre-laundered fabric to reduce shrinking
• Sewn eyelets
• Flat drawcord with capped tip
• Double layer 3-panel hood
• 320gm 1x1 ribbing at cuff and waistband
• Hidden welt pockets
• Tear away label

• 8.2 oz./yd_, 55/45 cotton/polyester fleece
• Unlined hood with matching drawcord
• Pouch Pocket
• 1x1 rib knit cuffs & waistband
• Classic Fit

• 7.5 oz./yd_, 80/20 cotton/polyester
• Full-cut 2-ply hood with matching drawcord
• Double-needle stitched seams
• Front pouch pocket
• Tear away label

• 10 oz./yd_, 75/25 ring-spun cotton/polyester blend 3-end fleece with 100% cotton face, 30 singles
• Heather colors are 52/48 cotton/polyester
• Unisex, slim fit
• Fleece lined hood
• Split stitch double-needle sewing on all seams
• Twill neck tape
• 1x1 jacquard ribbing at cuffs and waistband
• Gunmetal eyelets
• #5 YKK nylon kissing zipper
• Tear away label

• 9 oz./yd_, polyester sweatshirt material
• Black lower body and sleeves help keep a clean appearance
• Black ribbed-knit cuffs
• 2 wide high-performance reflective material
• Lower outside slash pockets

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 6 oz./yd_, 100% polyester
• Contrast raglan sleeves
• Front pouch pockets
• Overlock stitching detail
• Hemmed bottom & cuffs
• Nylon zipper
• Black drawcord

• 7.8 oz./yd_, 50/50 US grown cotton/polyester
• The polyester content is currently transitioning to CiCLO polyester
• Patented, low-pill, high-stitch density PrintPro XP fleece
• Double-ply hood, no drawcord for safety
• Pouch pocket
• Ribbed cuffs and waistband
• CPSIA tracking label compliant
• Transitioning to tear away label

This product meets the following Sustainable Style subcategories:

Sustainable Manufacturing: This product was made in a facility that is run by at least 50% renewable energy

Socially Conscious Manufacturing: This product was made in a facility that utilizes the Higg Index and has implemented Level 2 practices or above, and was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 10.5 oz./yd_ (US), 17.5 oz./L yd (CA), 75/25 cotton/recycled polyester, 18 singles
• Hammer Maxweight 2-end heavyweight fleece is a combination of style and functionality - made with recycled polyester and 100% cotton face ideal for decorating
• Classic fit
• 2-end heavyweight fleece with 100% cotton face
• 1x1 rib at cuffs and waistband
• Tear away label

• Proud member of the U.S. Cotton Trust Protocol
• Made with OEKO-TEX certified low-impact dyes

• 7.5 oz./yd_, 70/30 ring-spun cotton/polyester blend French terry, 32 singles
• Black & Charcoal Heather are 55/45 cotton/polyester blend French terry
• Pre-laundered
• Unisex, slim fit
• Unlined hood
• Split stitch double-needle sewing
• 1x1 ribbing at cuffs, waistband, and side panels
• Antique nickel eyelets
• Two antique nickel tipped flat drawcords (natural contrast + one dyed-to-match)
• Natural-colored exposed zipper tape
• Media pocket and eyelet in front pocket
• Thumbholes at cuffs
• Twill neck tape
• V-notch
• Tear away label

• 7 oz./yd_, 55/45 cotton/polyester burnout fabric
• Acid washed with silicone finish
• Flatlock stitching throughout
• Dyed-to-match drawcord
• Antique brass concealed zipper
• Split-pouch pockets
• Raw-edge hood opening, pocket seams, cuffs, waistband, zipper placket and side seams