Page 4: Custom Printed hooded fleece

• 4.5 oz./yd_, 100% ring-spun cotton, 30 singles
• Heather colors are 60/40 cotton/polyester blend jersey
• Slim fit
• Unlined hood
• Split stitch double-needle sewing
• Twill neck tape
• 1x1 ribbing at cuffs & waistband
• Sewn eyelets
• Pouch pocket
• Tear away label

• 75/25 ring spun cotton/poly (Ring Spun Sport Grey)
• 50/50 ring spun cotton/poly (Dark Heather)
• Two-end ring spun cotton face fabric
• Two-piece dyed-to-match jersey fabric-lined hood
• Double-needle hem and topstitching on outside of hood seam
• 3/8-inch flat drawcords
• Dropped shoulder
• 1x1 rib knit with spandex cuffs and bottom band
• Tubular body
• Classic fit
• Tearaway label

• 7 oz./yd_, 100% polyester moisture-management fleece fabric
• Badger Sport paneled shoulder for maximum movement
• Side and underarm textured waffle weave panels
• Poly rib cuff and waist
• Pouch pocket with hook-and-loop closures for headset opening
• Embroidered badger logo on left sleeve

• 10 oz./yd_, 80/20 ring-spun cotton/polyester
• Poly-filament cross-stretch fabric
• Coverstitched throughout
• Jersey-lined hood
• Spandex blend ribbed waistband and cuffs
• Pouch pocket
• Woven label

• 3.1 oz./yd_ (US), 5.2 oz./L yd (CA), 100% nylon oxford with water-resistant finish
• Trim: 100% polyester dobby
• Lining: 100% polyester taffeta
• Inner Jacket: 8.1 oz/yd_, 100% polyester anti-pill spun fleece
• UTK 2 temperature range:; 34F to -3F / 1C to -20C
• Snap-off hood
• Storm flap
• Thermal retention shockcord at hood and hem
• Adjustable cuffs with tabs
• Front yoke with piping

• 9-ounce 65/35 ring spun combed cotton/poly fleece
• Three-panel hood
• Dyed-to-match drawcords
• Metal zipper
• 2x2 rib knit cuffs and hem with spandex
• Raglan sleeves
• Front pouch pocket

• 8.3-ounce 65/35 ring spun cotton/polyester
• 100% ring spun cotton face (Solids Light Heather Grey)
• 60/40 ring spun cotton/ polyester (Heathers)
• Drop shoulder
• Self-fabric lined hood
• Dyed-to-match drawcords with stitched buttonholes
• Shoulder to shoulder back neck tape
• Side seamed
• 1x1 rib knit cuffs and hem
• Modest crop

• 3.9 oz./yd_/132 gsm (US), 6.5 oz./L yd (CA)
• SHELL: 100% polyester twill, with water resistant and cire finish
• SHELL LINING; Polyester taffeta
• LINER JACKET: 7.7 oz Polyester anti-pill fleece
• SHELL: storm flap with hidden snaps at top and bottom
• Inside placket; roll-away hood; adjustable cuffs with tabs
• Lower concealed pocket with zippers and reflective toggles
• Audio port access through inside left pocket
• Thermal retention shockcord at hood and drop back hem
• Reflective piping at shoulder yoke and upper back panels
• LINER: inside placket
• Center front reversible zipper
• Lower concealed pockets with autolock zippers
• Audio port access through inside left pocket

• 9 oz./yd_ (US), 15 oz/L yd (CA), 80/20 ring-spun cotton/polyester blend with 100% cotton face, 30 singles
• Unisex, classic fit
• Jersey lined hood
• Split stitch double-needle sewing on all seams
• Twill neck tape
• 1x1 ribbing at cuffs and waistband
• Sewn eyelets
• Woven label

• 8 oz./yd_, 52/48 ring-spun cotton/polyester blend fleece, 32 singles
• Unisex, slim fit
• Raglan sleeves
• Unlined hood
• Reverse coverstitch sewing
• Twill neck tape
• 1x1 ribbing at cuffs and waistband
• Sewn eyelets
• Self-fabric side panel inserts
• YKK antique nickel kissing zipper
• Tear away label  

• 8 oz./yd_, 60/40 cotton/polyester sueded fleece
• Double-needle stitched throughout
• Three-piece jersey lined, contrast-color hood with sewn eyelets and contrast-color drawcord
• Contrast-color self-fabric panels on chest and arms
• Contrast twill tape at back of neck
• Side seams
• Set-in pouch pocket
• 1x1 ribbed cuffs and waistband
• Tear away label

• 3.39 oz./yd_/115 gsm (US), 5.7 oz./L yd (CA), 100% polyester taslan
• Water-resistant finish
  
• Polyester fleece body, polyester taffeta in sleeve and hood
• 1.7oz. thermal polyfill insulation in sleeves
• Rollaway hood
• Storm flap with hidden snaps with partial inside placket and chainguard
• Thermal retention shockcord at hood and hem
• Elasticized cuffs
• Center front coil zipper with auto-lock slider and reflective rubble toggle
• Lower concealed pockets with zippers

• 9.3 oz./yd_, 50/50 cotton/polyester
• Oxford is 48/52 cotton/polyester
• Made with sustainably sourced USA grown cotton
• Three-end fleece
• Dri-Power moisture-management properties
• 2-ply hood with grommets
• Matching drawcord
• Front pouch pocket
• Ribbed knit cuffs and waistband
• Eagle "R" logo flagtag at left bottom hem

• 3.39 oz./yd_/115 gsm (US), 5.7 oz./L yd (CA), 100% polyester taslan
• Polyester fleece lining in body; polyester taffeta lining in sleeve and hood
• Water-resistant finish
  
• Rollaway hood
• Thermal retention shockcord at hood & hem
• Storm flap with hidden snaps with partial inside placket & chin guard
• Reflective piping at front and back yoke
• Elasticized cuffs
• Center front coil zipper with auto-lock slider & reflective rubber toggle
• Lower concealed pockets with zippers
• Audio port

• 4.6 oz./yd_ (US), 7.7 oz./L yd (CA), 155 gsm, 100% polyester pongee
• Shell lining is 100% taffeta with embossed print
• Fully seam-sealed waterproof shell
• Brushed tricot chin guard and pockets
• Storm flap with metal snap closure
• Thermal brushed tricot-lined collar
• Thermal retention shock cord at hood and hem

• Linner jacket is 7.5 oz./yd_., 255 gsm, 96/4 polyester/spandex bonded with 100% polyester fleece
• Linner jacket lining is 100% polyester tricot in sleeves
• Bonded two-layer soft shell liner with water repellent finish
• Brushed tricot-lined pockets
• Zip-off hood with back adjustable tab

• UTK 2 temperature range: 34F to -3F / 1C to -19C

• 3.5 oz./yd_ (US), 5.8 oz./L yd (CA), 100% nylon taslan
• Contrast nylon dobby trim
• Polyester mesh lining in body, taffeta in sleeves
• Inner jacket:: 9 oz./yd_, 100% polyester fleece
• Polyester taffeta lining;
• UTK 3 temperature range:; 30F to -9F / -1C to -23C
• Zip-off or roll-away hood
• Inside placket
• Thermal retention shockcord at hood, waist and hem
• Zip-off or roll-away hood
• Matching nylon taslan pocket welts and waistband
• Storm flap with security zippered pocket

• 4.4 oz./yd_/150 gsm (US), 7.3 oz./L yd (CA), 100% polyester twill
• Shell lining is 100% polyester taffeta with embossed print
• Linner jacket is 100% polyester jersey
• Inside storm placket with brushed tricot chin guard and collar
• Centre front and lower pockets with reverse coil zippers
• Zip-off hood with back adjustable tab
• Adjustable cuffs with tabs
• Chest pocket with invisible zipper
• Brushed tricot-lined pockets
• Thermal retention shock cord at hood and drop back hem
• Contrast stitching along flat reflective piping; audio port access through inside chest pocket
• Flat reflective piping at front, back and sleeves
• Audio port access through inside chest pocket
• Inside placket with brushed tricot-lined collar and pockets

• 5 oz./yd_, 100% combed ring-spun cotton
• Ribbed collar
• Self-fabric flutter detail at armhole
• Curved hem
• Coverstitched side seam construction
• CPSIA compliant tracking label on side seam
• EasyTearlabel

• 7.8-ounce 50/50 cotton/poly fleece
• Air jet yarn for softness
• Jersey-lined hood with dyed-to-match drawcords
• Side seamed with a contoured body for a feminine fit
• YKK metal zipper
• Front pockets

• 9 oz./yd_, 50/525/25 cotton/polyester/recycled polyester, 20singles
• Durable cover-stitching throughout
• No drawcord
• Set-in sleeves
• Front pouch pocket
• 1x1 rib with spandex at waistband and cuffs
• Champion C logo on left sleeve
• CPSIA tracking label compliant

• Proud member of the U.S. Cotton Trust Protocol.
• Made with OEKO-TEX certified low-impact dyes.
• We reduce plastic waste by the removal of polybags from all products except color White

This product meets the following Sustainable Style subcategories:

Sustainable Manufacturing: This product was made in a facility that is run by at least 50% renewable energy

Socially Conscious Manufacturing: This product was made in a facility that utilizes the Higg Index and has implemented Level 2 practices or above, and was made by a mill that has partnered with or is accredited by the Fair Labor Association