Page 9: Custom embroidered hooded outerwear

• 82/18 nylon/elastane matte finish
• 100% recycled polyester fill
• Strategically placed baffles for added warmth & low bulk
• Adjustable hood cinch-cord
• Tricot-lined collar for added comfort
• Jacquard 'Spyder' tape at interior hood
• Debossed Spyder neck tape
• Exposed reverse-coil zipper, internal draft flap
• Secure zip chest pocket
• Exposed, reverse-coil hand pocket zips
• Two internal drop pockets
• Secure back zip pocket for added storage
• Adjustable, internal hem cinch-cord
• Internal locker loop
• Back reflective tape for increased visibility

• 4.6-ounce 100% poly microfleece upper body lining
• 3-ounce quilted polyfill lower body lining
• 2-ounce quilted polyfill hood and sleeve lining
• Black bottom front and lower sleeves for a cleaner appearance
• Fabric waterproof rating: 5000MM
• Fully seam-sealed
• Adjustable rain hood
• Durable reflective 2-inch tape meets ANSI 107 requirements
• Full-length exterior storm flap
• Left chest pocket
• Right chest pocket
• Two lower front pockets
• Center front zippered pocket to hold a tablet
• Mic clips at shoulders
• Elastic cuffs
• Elastic hem
• Decoration access pocket

• 100% polyester
• 4 layer filtration system provides basic protection against non-toxic dust, smoke and other non-toxic particles found on the job site
• Concealed reflective piping along hood, front and back chest seams for better low light visibility
• Cuff inserts with thumbhole at sleeve hem
• Durable lightweight lime water-resistant ripstop shell with lining
• Adjustable hood
• 2 wide high-performance reflective tape
• Durable black water-resistant ripstop in high-wear areas, along the sides and under the arms
• Tall collar design with asymmetrical zipper to avoid chaffing
• Left chest pocket with a zipper closure
• Lower slash pockets with a zipper closure

• 2.7 oz./yd_ (US), 4.5 oz./L yd (CA), 100% 240T polyester
• Lining: 100% polyester mesh in upper back
• Water resistant finish
• Roll-away hood
• Adjustable cuffs with tabs
• Adjustable shock-cord at hood and hem
• Vented back yoke

• 100% polyester canvas with DWR finish
• Removable adjustable hood with locking drawcords
• Shaped exterior storm flap with snap closure
• Adjustable waist with locking drawcords
• Two lower front bellowed pockets with flaps and hook and loop closures side entries
• Chest pocket with flap and snap closure
• Interior left chest zippered pocket
• Adjustable cuffs with hook and loop closures
• Port Pocket for decoration access
• Insulation method: 5.3-oz. polyfill in body 4.4-oz. polyfill in sleeves and hood

• ANSI/ISEA 107 Class 3 certified
• 100% polyester shell 100% polyester quilted lining
• 6-ounce polyfill-lined body 4-ounce polyfill-lined sleeves
• 8000MM fabric waterproof rating
• Fully seam-sealed for additional waterproof protection
• Snap-off adjustable hood
• Drawcord waist with toggles
• Storm flap
• 2-in. wide reflective taping on front back and sleeves
• Two-way zipper
• Waterproof zippered pockets
• Hand warmer pocket
• Bellow pockets
• Molded adjustable tab cuffs with hook and loop closures
• Interior MP3 player pocket
• Port Pocket for easy embroidery access

• 92/8 recycled polyester/elastane drop needle
• Technical grid fleece moves moisture away from the body, keeping you comfortable
• Stretch comfort and mobility
• Zippered hand pockets keep things secure

• 100% nylon
• Water-resistant
• Drawstring hood
• Lightweight packable hooded pullover with quarter-zip entry
• Center-zip pocket
• Front welt pockets
• Full elastic cuffs
• Hem casing with drawcord

• Liner Jacket Lining: 100% polyester taffeta
• Shell: 3.5 oz./yd_ (US), 5.8 oz./L yd (CA), 100% nylon 228T taslan
• Lining:100% polyester mesh in upper body
• UTK 3 temperature range, 30F to -9F / -1C to -23C
• Storm flap with security zippered pocket
• Inside placket
• Thermal retention shockcord at waist, hem and hood
• Zip-off hood
• reflective piping along yoke
• adjustable cuffs with tabs
• EZEM system

• 95/5 poly/spandex woven shell bonded to a water-resistant film insert and a 100% polyester microfleece lining
• 5000MM fabric waterproof rating
• 3000G/M fabric breathability rating
• Fully seam sealed and waterproof zippers for complete protection
• Vertical welded waterproof zippered chest pocket
• Snap-off hood
• Welded waterproof sleeve pocket
• Interior storm flap with chin guard
• Molded adjustable tab cuffs with hook and loop closures
• Port Pocket for decoration access

• Body: 6 oz./yd_/200 gsm (US), 10 oz./ L yd (CA), 3-Layer 100% polyester interlock bonded to polyester birdseye with inner membrane
• Contrast: 1 oz. polyester shell with polyester Lining in front & back hybrid panels
• Insulation: 2.3 oz. poly fill in front & back hybrid panels
• 8,000 mm waterproof rating
• 1,000 g breathability rating
• Center front reverse coil zipper, with rubber toggle
• Zippered pockets at lower front, and left sleeve
• Reflective piping details
• Tear away main label

• 1 oz./yd_ (US), 1.7 oz./L yd (CA), 100% recycled nylon
• Lining: 100% polyester taffeta
• Insulation: 5.6 oz./yd_, 100% polyester UTK SubDown fill
• Water-repellent, water-resistant
• Shock cord at hood
• Center front placket with metal snap closure
• Dyed-to-match jersey binding at shoulders, sleeves, cuffs and bottom hem
• Self-fabric cuffs with adjustable metal snap closure
• Lower zippered pockets
• Packable style; folds into zippered pouch pocket 

• 7.8 oz./yd_, 100% nylon taffeta outer shell
• 75/13/12 polyester/rayon/cotton grey heather fleece lined body, sleeves and hood
• Water resistant
• Hood with drawcord and sliders
• Set-in sleeves
• Inside storm flap
• Reinforced slash front zippered pockets
• Elastic cuffs and bottom band
• Woven label
  

• Highly waterproof and breathable 5K/5K fabric
• 5000MM fabric water protection rating 5000G/M2 fabric breathability rating detachable hood with locking drawcord for adjustability exterior storm flap with hook and loop closures front Vislon zippered pockets adjustable tab cuffs with hook and loop closures and an open hem with locking drawcord
• Decoration access pocket
• Embroidered Eddie Bauer contrast logo on right hem
• WeatherEdge embroidered logo on left sleeve indicates reliable waterproofing and breathable technology

• ANSI/ISEA 107 Class 3 certified
• Water resistant 100% PU shell 100% polyester backing
• 8000MM fabric waterproof rating
• Snap-off hood with drawcord and toggle for adjustability
• Two-way black Vislon zipper
• Internal storm flap
• Half-elastic adjustable tab cuffs with hook and loop closures
• 2-in. wide reflective taping on front back and sleeves
• Two welt pockets
• Drawcord hem with toggle adjustability
• This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

• 100% polyester shell
• 100% polyester mesh upper-body lining 100% polyester lower-body front and sleeve lining
• Stowaway hood in cadet collar
• Locker loop
• Interior chest pocket
• Front and back vents for breathability and easy embroidery
• Front zippered pockets
• Adjustable elastic cuffs with hook and loop closures

• 8.3 oz./yd_, 80/20 ringspun cotton/polyester
• Three-end fleece with 30 Singles, 100% cotton face yarn
• Under 5% shrinkage
• Double-needle top stitch on all seams, matching round drawcord with tipped ends
• Three-panel hood with fleece lining
• Twill neck tape
• YKK zipper
• 1x1 ribbing at sleeve, cuff and waistband
  
• Tear away label

• 2.8 oz./yd_ (US), 4.7 oz./L yd (CA), 100% polyester micro poplin
• Wind- and water-resistant
• Half-zip hood with adjustable bungie cord
• Dyed-to-match coil zipper
• Encased elastic cuffs
• Adjustable waist drawcord
• Front entry hidden pouch pocket
• Packs into mesh lined pouch pocket
• Champion "C" patch on left sleeve

• Proud member of the U.S. Cotton Trust Protocol.
• Made with OEKO-TEX certified low-impact dyes.
• We reduce plastic waste by the removal of polybags from all products except color White

This product meets the following Sustainable Style subcategories:

Socially Conscious Manufacturing: This product was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label